Safety instructions 9/68
RE 92003-01-B/12.2015, A4VG Series 32,
Bosch Rexroth AG
2 Safety instructions
2.1 About this chapter
The axial piston unit has been manufactured according to the generally accepted
rules of current technology. There is, however, still a danger of personal injury
or damage to equipment if this chapter and the safety instructions in this
documentation are not complied with.
▶
Read this documentation completely and thoroughly before working with the axial
piston unit.
▶
Keep this documentation in a location where it is accessible to all users at all times.
▶
Always include the required documentation when you pass the axial piston unit
on to third parties.
2.2 Intended use
Axial piston units are hydraulic components, meaning that in their application they
are classified neither as complete nor as partly completed machinery in the sense
of the EC Machinery Directive 2006/42/EC. A component is exclusively intended to
form an partly completed machinery or a complete machinery together with other
components. The component may only be commissioned after it has been installed
in the machine/system for which it is intended and the safety of the entire system
has been established in accordance with the machinery directive.
This product is intended for the following use:
The axial piston unit is only approved as a pump for hydrostatic drives in closed circuit.
▶
Observe the technical data, the application and operating conditions and
the performance limits as specified in data sheet 92003 and in the order
confirmation. Information about approved hydraulic fluids can be found in
data sheet 92003.
The axial piston unit is only intended for professional use and not for private use.
Intended use includes having read and understood the complete documentation,
especially chapter 2 “Safety instructions” on page 9.
2.3 Improper use
Any use other than that described as intended use shall be considered as improper
and is therefore impermissible.
Bosch Rexroth AG is not liable for damages resulting from improper use. The user
bears all risks from improper use.
The following forms of forseeable use are also considered to be improper (this list
does not claim to be exhaustive):
•
Use outside the operating parameters approved in the data sheet or in the order
confirmation (unless specifically approved by the customer)
•
Use of non-approved fluids, e.g., water or polyurethane components
•
Changes to factory settings by unauthorized persons
•
Use of add-ons (e.g., attachment filter, control unit, valves) not in combination with
the specified Rexroth components
