Bosch A4VG A4VG 32 Series Скачать руководство пользователя

Страница: 53 / 68

Maintenance and repair 53/68

RE 92003-01-B/12.2015, A4VG Series 32,

Bosch Rexroth AG

10 Maintenance and repair

NOTICE

Inspection and maintenance overdue.

Risk of property damage.

▶

Perform the specified inspection and maintenance work at the intervals
described in this manual.

10.1 Cleaning and care

NOTICE

Damage to seals and electrical system due to mechanical forces.

The jet of a high-pressure cleaner may damage the seals and electrical system of
the axial piston unit.

▶

Do not point the high-pressure cleaner at sensitive components, e.g., shaft seal,
electrical connections and components.

For cleaning and care of the axial piston unit, observe the following:

▶

Check whether all seals and fittings on the connections are securely seated to
ensure that no moisture can penetrate into the axial piston unit during cleaning.

▶

Use only water and, if necessary, a mild cleaning agent to clean the axial piston
unit. Never use solvents or corrosive cleaning agents.

▶

Remove major external contamination and keep sensitive and important
components, such as solenoids, valves and sensors, clean.

Содержание A4VG A4VG 32 Series





































































Результаты поиска

Содержание A4VG A4VG 32 Series

Отзывы:

Похожие инструкции для A4VG A4VG 32 Series

Бренды по названию

Популярные бренды

Bosch A4VG A4VG 32 Series, Инструкция по эксплуатации

Результаты поиска

Содержание A4VG A4VG 32 Series

Отзывы:

Похожие инструкции для A4VG A4VG 32 Series

Бренды по названию

Популярные бренды