IR Illuminator 5000
Connection | en
11
Adjustments
8 mm
1
.
To adjust the sensitivity (Photocell adjust
1
):
1.
Use a thick flathead screwdriver to remove the protective
sealing cap
2.
Use a small screwdriver to adjust the internal control:
–
To use the remove switching control input, turn the
control fully counterclockwise. (Now the IR LED lights
when the green and blue wires are not connected; it
does not light when the wires are connected.)
–
To set the light level at which the illuminator switches
on, turn the control counterclockwise to turn on the
illuminator when there is more light; turn it clockwise
to turn it on when it is darker. (The factory setting
turns on the illuminator at approximately 30 lx and
turns it off at approximately 70 lx.)
3.
Put the protective sealing cap back in place and secure.
Bosch Security Systems
2016.8 | 1.0 | AM18-Q0715
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
Содержание A1 Security Cameras IR Illuminator 5000 Series
Страница 2: ...Available from A1 Security Cameras www a1securitycameras com email sales a1securitycameras com ...
Страница 18: ...Available from A1 Security Cameras www a1securitycameras com email sales a1securitycameras com ...
Страница 19: ...Available from A1 Security Cameras www a1securitycameras com email sales a1securitycameras com ...
