English |
15
Technical Data
Industrial cordless screwdriver
EXACT
12V-6-670
12V-3-1100
12V-2-670
Article number
3 602 D96 4.0
3 602 D96 4.1
3 602 D96 4.2
Rated voltage
V=
12
12
12
No-load speed n
0
A)
min
-1
134–670
220–1100
134–670
Max. torque, hard/soft screwdriving applic-
ation according to ISO 5393
A)
Nm
1.5–6.0
1.0–3.0
0.5–2.0
Tool holder
– Quick-change chuck
¼"
¼"
¼"
Weight according to
EPTA-Procedure 01:2014
B)
kg
0.83–1.07
0.83–1.07
0.83–1.07
Protection rating
IP 20
IP 20
IP 20
Rechargeable battery
(not included in the
scope of delivery)
Li-ion
Li-ion
Li-ion
Recommended ambient temperature dur-
ing charging
°C
0 to +35
0 to +35
0 to +35
Permitted ambient temperature during op-
eration
C)
and during storage
°C
–20 to +50
–20 to +50
–20 to +50
Recommended rechargeable batteries
GBA 12V...
GBA 12V...
GBA 12V...
Recommended chargers
GAL 12...
GAX 18...
GAL 12...
GAX 18...
GAL 12...
GAX 18...
A) Measured at 20−25 °C with rechargeable battery
GBA 12V 6.0Ah
.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2
.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). The noise level when working can
exceed the volume stated.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-2
:
Tightening screws and nuts of the maximum permitted size:
a
h
<
2.5
m/s
2
, K =
1.5
m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
Charging the Battery
u
Use only the chargers listed in the technical data.
Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note:
The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
Bosch Power Tools
1 609 92A 5K5 | (05.10.2020)
