Bosch 3 601 K63 A01, Оригинальное руководство пользователя

Страница: 17 / 125

English | 17
– Mark the centre of the laser line on wall A as point Ⅲ (vertically above or
below point Ⅰ ).
– The discrepancy d between the two marked points Ⅰ and Ⅲ on wall A re-
veals the actual horizontal deviation of the measuring tool.
The maximum permitted deviation on the measuring distance of
2 ×
5 m = 10 m is as follows:
10 m × ± 0.5 mm/m = ± 5 mm. The discrepancy d between points Ⅰ and Ⅲ
must therefore amount to no more than 5 mm.
Checking the Levelling Accuracy of the Vertical Lines
For this check, you will need a door opening (on solid ground) which has at
least 2.5 m of space either side of the door.
– Place the measuring tool 2.5 m away from the door opening on a firm, flat
surface (not on a tripod). Select vertical mode with automatic levelling.
Aim the vertical laser line at the door opening and allow the measuring
tool to level in.
2,5 m
2,5 m
– Mark the centre of the vertical laser line on the floor of the door opening
(point Ⅰ ), 5 m away on the other side of the door opening (point Ⅱ ) and on
the upper edge of the door opening (point Ⅲ ).
Bosch Power Tools 1 609 92A 58R | (04.03.2020)