Bosch 26614 Скачать руководство пользователя страница 56

2609140646   07/09                                                                                                                       Printed in Malaysia

LIMITED WARRANTY OF BOSCH PORTABLE AND BENCHTOP POWER TOOLS

Robert Bosch Tool Corporation (“Seller”) warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from
defects in material or workmanship for a period of one year from date of purchase. SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY
under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts,
without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or misrepaired by persons
other than Seller or Authorized Service Station. To make a claim under this Limited Warranty, you must return the complete portable or benchtop
power tool product, transportation prepaid, to any BOSCH Factory Service Center or Authorized Service Station.  For Authorized BOSCH Power Tool
Service Stations, please refer to your phone directory.

THIS  LIMITED  WARRANTY  DOES  NOT  APPLY  TO  ACCESSORY  ITEMS  SUCH  AS  CIRCULAR  SAW  BLADES,  DRILL  BITS,  ROUTER  BITS,  JIGSAW
BLADES, SANDING BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.

ANY  IMPLIED  WARRANTIES  SHALL  BE  LIMITED  IN  DURATION  TO  ONE  YEAR  FROM  DATE  OF  PURCHASE.  SOME  STATES  IN  THE  U.S., SOME
CANADIAN PRO V INCES DO  NOT  ALLOW  LIMITATIONS  ON  HOW  LONG  AN  IMPLIED  WARRANTY  LASTS,  SO  THE  ABOVE  LIMITATION  MAY  NOT
APPLY TO YOU.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING  BUT  NOT  LIMITED  TO  LIABILITY
FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION  OR
EXCLUSION MAY NOT APPLY TO YOU.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.

THIS  LIMITED  WARRANTY  APPLIES  ONLY  TO  PORTABLE  AND  BENCHTOP  ELECTRIC  TOOLS  SOLD  WITHIN  THE  UNITED  STATES  OF  AMERICA,
CANADA  AND  THE  COMMONWEALTH  OF  PUERTO  RICO.    FOR  WARRANTY  COVERAGE  WITHIN  OTHER  COUNTRIES,  CONTACT  YOUR  LOCAL
BOSCH DEALER OR IMPORTER.

GARANTIE LIMITÉE DES OUTILS ÉLECTRIQUES PORTATIFS ET D'ÉTABLI BOSCH

Robert  Bosch  Tool  Corporation  (le  «  vendeur  »)  garantit  à  l'acheteur  initial  seulement  que  tous  les  outils  électriques  portatifs  et  d'établi  BOSCH
seront exempts de vices de matériaux ou d'exécution pendant une période d'un an depuis la date d'achat. LA SEULE OBLIGATION DU VENDEUR ET
LE SEUL RECOURS DE L’ACHETEUR sous la présente garantie limitée, et en autant que la loi le permette sous toute garantie ou condition implicite
qui en découlerait, sera l’obligation de remplacer ou réparer gratuitement les pièces défectueuses matériellement ou comme fabrication, pourvu que
lesdites  défectuosités  ne  soient  pas  attribuables  à  un  usage  abusif  ou  à  quelque  réparation  bricolée  par  quelqu’un  d’autre  que  le  vendeur  ou  le
personnel  d’une  station-service  agréée.  Pour  présenter  une  réclamation  en  vertu  de  cette  garantie  limitée,  vous  devez  renvoyer  l'outil  électrique
portatif  ou  d'établi  complet,  port  payé,  à  tout  centre  de  service  agréé  ou  centre  de  service  usine.    Veuillez  consulter  votre  annuaire  téléphonique
pour les adresses.

LA PRÉSENTE GARANTIE NE S’APPLIQUE PAS AUX ACCESSOIRES TELS QUE LAMES DE SCIES CIRCULAIRES, MÈCHES DE PERCEUSES, FERS
DE TOUPIES, LAMES DE SCIES SAUTEUSES, COURROIES DE PONÇAGE, MEULES ET AUTRES ARTICLES DU GENRE.

TOUTE  GARANTIE  IMPLICITE  SERA  LIMITÉE  COMME  DURÉE  À  UN  AN  À  COMPTER  DE  LA  DATE  D’ACHAT.  CERTAINS  ÉTATS  AMÉRICAINS,
CERTAINES  PROVINCES  CANADIENNES  N’ADMETTANT  PAS  LE  PRINCIPE  DE  LA  LIMITATION  DE  LA  DURÉE  DES  GARANTIES  IMPLICITES,  IL
EST POSSIBLE QUE LES LIMITATIONS CI-DESSUS NE S’APPLIQUENT PAS À VOTRE CAS.

EN AUCUN CAS LE VENDEUR NE SAURAIT ÊTRE TENU POUR RESPONSABLE DES INCIDENTS OU DOMMAGES INDIRECTS (INCLUANT, MAIS NE
SE  LIMITANT  PAS  AUX  PERTES  DE  PROFITS)  CONSÉCUTIFS  À  LA  VENTE  OU  L’USAGE  DE  CE  PRODUIT.  CERTAINS  ÉTATS  AMÉRICAINS  ET
CERTAINES PROVINCES CANADIENNES N’ADMETTANT PAS LE PRINCIPE DE LA LIMITATION NI L’EXCLUSION DES DOMMAGES INDIRECTS ET
CONSÉQUENTIELS, IL EST POSSIBLE QUE LES LIMITATIONS OU EXCLUSIONS CI-DESSUS NE S’APPLIQUENT PAS À VOTRE CAS.

LA PRÉSENTE GARANTIE VOUS ACCORDE DES DROITS BIEN DÉTERMINÉS, Y COMPRIS POSSIBLEMENT CERTAINS DROITS VARIABLES DANS
LES DIFFÉRENTS ÉTATS AMÉRICAINS, PROVINCES CANADIENNE ET DE PAYS À PAYS.

CETTE  GARANTIE  LIMITÉE  NE  S'APPLIQUE  QU'AUX  OUTILS  ÉLECTRIQUES  PORTATIFS  ET  D'ÉTABLI  VENDUS  AUX  ÉTATS-UNIS  D'AMÉRIQUE,
AU  CANADA  ET  AU  COMMONWEALTH  DE  PORTO  RICO.  POUR  COUVERTURE  DE  GARANTIE  DANS  LES  AUTRES  PAYS,  CONTACTEZ  VOTRE
IMPORTATEUR OU REVENDEUR BOSCH LOCAL.

GARANTIA LIMITADA PARA HERRAMIENTAS MECANICAS PORTATILES Y PARA TABLERO DE BANCO BOSCH

Robert  Bosch  Tool  Corporation  ("el  Vendedor")  garantiza,  únicamente  al  comprador  original,  que  todas  las  herramientas  mecánicas  portátiles  y
para tablero de banco BOSCH estarán libres de defectos de material o de fabricación durante un período de un año a partir de la fecha de compra.
LA  UNICA  OBLIGACION  DEL  VENDEDOR  Y  EL  RECURSO  EXCLUSIVO  QUE  USTED  TIENE  bajo  esta  Garantía  Limitada  y,  hasta  donde  la  ley  lo
permita,  bajo  cualquier  garantía  o  condición  implícita  por  ley,  consistirá  en  la  reparación  o  sustitución  sin  costo  de  las  piezas  que  presenten
defectos  de  material  o  de  fabricación  y  que  no  hayan  sido  utilizadas  inco rrectamente,  manejadas  descuidadamente  o  reparadas  incorrectamente
por  personas  que  no  sean  el  Vendedor  o  una  Estación  de  servicio  autorizada.  Para  efectuar  una  reclamación  bajo  esta  Garantía  Limitada,  usted
debe  devolver  el  producto,  que  consiste  en  la  herramienta  mecánica  portátil  o  para  tablero  de  banco  completa,  con  el  transporte  pagado,  a
cualquier  Centro  de  servicio  de  fábrica  o  Estación  de  servicio  autorizada.    Para  Estaciones  de  servicio  autorizadas  de  herramientas  mecánicas
BOSCH, por favor, consulte el directorio telefónico.

ESTA  GARANTIA  LIMITADA  NO  SE  APLICA  A  ARTICULOS  ACCESORIOS  TALES  COMO  HOJAS  PARA  SIERRAS  CIRCULARES,  BROCAS  PARA
TALADROS,  BROCAS  PARA  FRESADORAS,  HOJAS  PARA  SIERRAS  DE  VAIVEN,  CORREAS  PARA  LIJAR,  RUEDAS  DE  AMOLAR  Y  OTROS
ARTICULOS RELACIONADOS.

TODAS  LAS  GARANTIAS  IMPLICITAS  TENDRAN  UNA  DURACION  LIMITADA  A  UN  AÑO  A  PARTIR  DE  LA  FECHA  DE  COMPRA.  ALGUNOS
ESTADOS  DE  LOS  EE.UU.  Y  ALGUNAS  PROVINCIAS  CANADIENSES  NO  PERMITEN  LIMITACIONES  EN  CUANTO  A  LA  DURACION  DE  UNA
GARANTIA IMPLICITA, POR LO QUE ES POSIBLE QUE LA LIMITACION ANTERIOR NO SEA APLICABLE EN EL CASO DE USTED.

EL VENDEDOR NO SERA RESPONSABLE EN NINGUN CASO DE NINGUN DAÑO INCIDENTAL O EMERGENTE (INCLUYENDO PERO NO LIMITADO A
RESPONSABILIDAD  POR  PERDIDA  DE  BENEFICIOS)  QUE  SE  PRODUZCA  COMO  CONSECUENCIA  DE  LA  VENTA  O  UTILIZACION  DE  ESTE
PRODUCTO.  ALGUNOS  ESTADOS  DE  LOS  EE.UU.  Y  ALGUNAS  PROVINCIAS  CANADIENSES  NO  PERMITEN  LA  EXCLUSION  O  LIMITACION  DE
LOS DAÑOS INCIDENTALES O EMERGENTES, POR LO QUE ES POSIBLE QUE LA LIMITACION O EXCLUSION ANTERIOR NO SEA APLICABLE EN
EL CASO DE USTED.

ESTA  GARANTIA  LIMITADA  LE  CONFIERE  A  USTED  DERECHOS  LEGALES  ESPECIFICOS  Y  ES  POSIBLE  QUE  USTED  TAMBIEN  TENGA  OTROS
DERECHOS QUE VARIAN DE ESTADO A ESTADO EN LOS EE.UU., DE PROVINCIA A PROVINCIA EN CANADA Y DE UN PAIS A OTRO.

ESTA GARANTIA LIMITADA SE APLICA SOLAMENTE A HERRAMIENTAS ELECTRICAS PORTATILES Y PARA TABLERO DE BANCO VENDIDAS EN
LOS ESTADOS UNIDOS DE AMERICA, CANADA Y EL ESTADO LIBRE ASOCIADO DE PUERTO RICO. PARA COBERTURA DE GARANTIA EN OTROS
PAISES, PONGASE EN CONTACTO CON SU DISTRIBUIDOR O IMPORTADOR LOCAL DE BOSCH.

© Robert Bosch Tool Corporation 1800 W. Central Road Mt. Prospect, IL 60056-2230

Exportado por: Robert Bosch Tool Corporation Mt. Prospect, IL 60056-2230, E.U.A.

Importado en México por: Robert Bosch, S.A. de C.V., Calle Robert Bosch No. 405, Zona Industrial,

Toluca, Edo. de México, C.P. 50070, Tel. (722) 2792300

BM 2609140646 07-09:BM 2609140646 07-09  7/29/09  2:21 PM  Page 56

Содержание 26614

























































Отзывы: