Page4
Operating instructions
Procedure to light the appliance.
Fig. 4
To ensure that the water, at maximum water flow, will be of adequate temperature for sanitary
purposes ( approx 40°C ),
the appliance must be adjusted by the plumber at the time of
installation.
When hotter water is required, ie dishwashing, simply reduce the flow of water at the tap and
up to 60°C water will be delivered.
Refer to the commissioning section for adjustment details.
Warning
-
If the pilot light is extinguished, wait 5 minutes before attempting to relight the
appliance. If the appliance does not operate, burns with yellow flame, leaks water or a gas
smell is evident, turn off and contact the local gas authority, the manufacturer or an
authorised service person.
When attempting to light the appliance ensure that all hot water taps are turned off.
CAUTION:
It is recommended that for sanitary fixtures used primarily for the purpose of
personal hygiene that a temperature control device be fitted (such as a tempering valve) as
per AS.3498.
25/10/2011
9 708 069 951
