18
| English
1 609 92A 3DM | (14.10.16)
Bosch Power Tools
Product Description and
Specifications
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Release lever for protection guard
2
Spindle lock button
3
On/Off switch
4
Lock-off button for On/Off switch
5
Auxiliary handle (insulated gripping surface)
6
Grinder spindle
7
Extraction hood for sanding*
8
Mounting flange with O-ring
9
Carbide grinding head*
10
Clamping nut
11
Quick-clamping nut
*
12
Protection guard for grinding
13
Grinding wheel*
14
Protection guard for cutting*
15
Cutting disc*
16
Hand guard*
17
Rubber sanding plate*
18
Sanding sheet*
19
Round nut*
20
Cup brush*
21
Cutting guide with dust extraction protection guard *
22
Diamond cutting disc*
23
Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-3:
Surface grinding: a
h
=5.5 m/s
2
, K=1.5 m/s
2
,
Disk sanding: a
h
=3.0 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
Angle Grinder
GWS 8-115 Z
GWS 10-125 Z
Article number
3 601 H31 0..
3 601 H32 0..
Rated power input
W
800
1000
Output power
W
500
630
Rated speed
min
-1
11000
11000
Grinding disc diameter, max.
mm
115
125
Thread of grinder spindle
M 14
M 14
Thread length (max.) of grinder spindle
mm
22
22
Weight according to EPTA-Procedure 01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
kg
kg
2.1
2.0
2.3
2.2
Protection class
/
II
/
II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-124-007.book Page 18 Friday, October 14, 2016 8:36 AM
