Bosch 06008B6101, Оригинальное руководство пользователя

Страница: 16 / 263

16 | English
Connect the hose (4) to the water outlet (9) and the spray
gun (18) (see figure F ).
Select the desired spray pattern by rotating the nozzle head
(1) (see figure I ).
Select the desired jet strength with the pressure selector
(12) (see figure H ).
Press the On/Off switch (13) and pull and hold the trigger
(2) until water comes out (see figure G ).
Note : It can take up to 10 seconds for water to come out
when the product is first used after the water tank has been
emptied.
Autostop Function
The machine is designed to switch off the motor as soon as
the spray-gun trigger
(2) is released.
Auto-off Function
The motor switches off when the product runs continuously
for
30 minutes.
Autosleep Function
The machine automatically switches off after 5 minutes
without operation.
Mounting/dismounting the brush (see figure J)
The brush (5) mounts onto the spray gun and makes clean-
ing more effective.
Slide the brush straight onto the spray gun
(18) . Guide the
upper and bottom clip of the brush into the corresponding
openings on the spray gun.
Remove the brush by pressing the bottom clip upward and
pulling the brush off the spray gun.
Troubleshooting
Cordless pressure cleaner
Problem Possible Cause Corrective Measure
Machine does not
power up Battery discharged Recharge battery
Battery too hot/cold Allow to cool/warm
Machine frozen Wait until machine has defrosted
Pressure pulsating Blocked nozzle Clean nozzle
Air in pump Operate machine in turbo-pressure mode with
nozzle set to shower jet until system is air-free
Motor running but no
or limited working
pressure Water tank empty Refill water tank
Pump not vented Press and hold trigger to vent air
Power indication lights
up but pump no longer
running The auto-off function has been activated Switch machine off and then on again
Machine switches off The autosleep function has been activated Press On/Off switch for activation
Battery discharged Recharge battery
Water leaks from ma-
chine Leaking pump Slight water leaks are possible; in case of excess-
ive leaks, contact Bosch Service Centre
Leaking connections Check if connections are properly mounted
Filler cap untight Check if filler cap is properly closed
Motor starts in standby
mode Pump, spray gun or hose leaking In case of continuous malfunctions in standby
mode, contact Bosch Service Centre
Hose cannot be re-
moved When machine is still switched on, pressure in
system increases the required force to remove
connectors Switch machine off, then pull trigger to release
the pressure
Tank is not being filled,
although the tap water
is connected Water hose and/or hose connection is clogged or
blocked Switch machine off, check and clean water hose
or hose connection
Battery and charger
F 016 L94 184 | (10.12.2020) Bosch Power Tools