Bosch 0.601.7B2.000, Оригинальное руководство пользователя

Страница: 19 / 307

English | 19
(20) X-LOCK diamond core cutter
A)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Angle grinder GWX 9-115 GWX 9-115 S GWX 9-125 S GWX 9-125
Article number 3 601 GB1 0.. 3 601 GB1 0.. 3 601 GB2 0.. 3 601 GB2 0..
Rated power input W 900 900 900 900
Power output W 450 450 450 450
Rated speed min
-1
11,000 11,000 11,000 11,000
Speed adjustment range min
-1
11,000 2800–11,000 2800–11,000 11,000
Max. grinding disc diameter mm 115 115 125 125
Speed preselection – ● ● –
Restart protection – ● ●
Weight according to EPTA-Pro-
cedure 01:2014
– with additional low-vibration
auxiliary handle
kg 2.1 2.1 2.1 2.1
– with standard auxiliary handle kg 2.0 2.0 2.0 2.0
Protection class / II / II / II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/vibration information
Noise emission values determined according to
EN 60745-2-3 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
93 dB(A); sound power level
104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-3 :
Surface grinding (roughing):
a
h
= 6.5 m/s
2
, K = 1.5 m/s
2
,
Grinding with abrasive disc:
a
h
= 6.0 m/s
2
, K = 1.5 m/s
2
.
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
Fitting protective equipment
u
Pull the plug out of the socket before carrying out any
work on the power tool.
Note: If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
vice immediately; see the "After-sales service and advice on
using products" section for addresses.
Protective guard for grinding
Place the protective guard
(7) onto the holder on the
power tool until the coding
cams of the protective
guard are aligned with the
holder. When doing so,
press and hold the unlock-
ing lever
(1) .
Press the protective guard
(7) onto the spindle collar
until the shoulder of the
protective guard is sitting
on the flange of the power
tool and rotate the protect-
ive guard until it audibly
clicks into place.
Adjust the position of the protective guard
(7) to meet the
requirements of the operation. To do this, push the unlock-
Bosch Power Tools 1 609 92A 4FA | (21.01.2019)
–