Bosch Rexroth IPC, Руководство по подключению

Страница: 66 / 99

Interfaces, Ports & Connectors
6–18
1070 073 822-104 (02.06) GB
6.6 X11 power supply connection
X11 Power supply, backlight power, mouse and keyboard signals from
control panel
The X11 power supply connection ensures reliable service of the control
panel and other components even over extended physical distances.
For distances below 1.5 m, mouse and keyboard can also be directly con-
nected to the PC.
The X11 connection provides the following services:
D
Operating power to the control panel. IPC: 12 VDC
IPC300: 24 VDC
D
Power required for backlight source.
D
Communication of mouse and keyboard signals
(refer also to Sections 6.7 and 6.8)
D
Connection between COM3 and control panel as required. The connec-
tion is configured with the use of the S3 DIP switch and is identical for IPC
and IPC300.
COM3 interconnected with X11: S3 switch segments 1 and 2: ON
.
IPC300 with Pentium III / 400 MHz only:
Always make sure that segment 4 of the DIP switch S3 is closed
(ON) in order to activate the backlight “sleep” function of the BF3xx.
1 2 3 4 5 6 7 8
ON
OFF
S3
Female DB-15 connector
Cable length: IPC: Max. 10 m
IPC300: Max. 15 m, can be extended to 75 m
via repeaters in conjunction with Gigabit
interface (refer to page 6–13)
Cable type: Screened, min. cross-section 0.14 mm
2
Refer to information on premanufactured connecting cables in Section 10.2.
1
2
Screen applied to
metal shell of
connector
3
4
5
6
7
8
9
1
8
9 15
X11
X11
10
11
12
13
15
14
max. 10/15 m
To control panel
(X33)
PCC_H
PCC_L
PCD_H
PCD_L
MSC_H
MSC_L
MSD_H
MSD_L
GND
TXD 3
GND
RXD 3
+12V (IPC) / +24V (IPC300)
SW_Back