60
/
72
Bosch Rexroth AG
XGE...
|
3 609 929 255/2011-09
Maintenance and repair
If the product is installed in an overall sys-
tem, no further manual operation is re-
quired. The tightening channel, the tighte-
ning programs and applications, etc. are
configured or changed via the operating
program of the tightening system, e.g.
BS300 or BS350.
9
Maintenance and
repair
9.1
Cleaning and care
X
For cleaning Rexroth tightening spind-
les and their components, use the
LOCTITE® 7063™ detergent, see sub-
sequent manufacturer's information.
CAUTION
High torques with hand-held
Rexroth tightening spindles!
If tightenings with higher torques are car-
ried out with a hand-held Rexroth tighte-
ning spindle, injuries, particularly at the
joints, may result due to the acting
forces.
X
Assemble and use a torque support.
CAUTION
Direct contact with the detergent!
Direct skin or eye contact with the deter-
gent as well as swallowing or inhaling
the detergent may cause injuries.
X
Avoid direct physical contact with the
detergent.
X
Observe the instructions for use and
first aid in the "Technical safety
sheet" as well as in the "Safety data
sheet" of the detergent manufacturer.
NOTE
Penetrating dirt or liquids!
Failures may occur. Safe function of the
product is no longer ensured.
X
Always provide for absolute cleanli-
ness when working at the product.
Manufactu-
rer:
Henkel AG & Co. KGaA
Henkelstr. 67
40191 Düsseldorf
Germany
