Bosch Automation CPS21_3, Руководство пользователя

Страница: 11 / 107

Safety Instructions 1–7
1070 073 825-103 (02.04) GB
Observe the following protective measures for electrostatically endangered
modules (EEM)!
D
The Employees responsible for storage, transport and handling must be
trained in ESD protection.
D
EEMs must be stored and transported in the protective packaging speci-
fied.
D
Out of principle, EEMs may be handled only at special ESD work stations
equipped for this particular purpose.
D
Employees, work surfaces and all devices and tools that could come into
contact with EEMs must be on the same potential (e.g. earthed).
D
An approved earthing wrist strap must be worn. It must be connected to
the work surface via a cable with integrated 1 M
W
resistor.
D
EEMs may under no circumstances come into contact with objects sus-
ceptible to accumulating an electrostatic charge. Most items made of
plastic belong to this category.
D
When installing EEMs in or removing them from an electronic device, the
power supply of the device must be switched OFF.