Bosca SOUL 700 Скачать руководство пользователя страница 5

Страница: 5 / 48

Do not operate your stove if you smell smoke coming from it. Turn it off, do not unplug, monitor it, and call your

dealer.

Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or “freshen up” a

fire in this stove. Keep all such liquids well away from the stove while in use.

Never block free airflow through the open vents of the stove.

Never try to repair or replace any part of the stove unless instructions are given in this Manual. All other work should

be done by a trained technician.

The stove will not operate during a power outage. If an outage does occur, check the stove for smoke spillage and

open a window if any smoke spills into the room.

Disconnect the power cord before performing any maintenance or repairs on the stove.

NOTE:

Turning the stove "off" does not disconnect all power from the stove.

Do not unplug the stove if you suspect a malfunction. Turn the stove off, immediately inspect it, and call your dealer.

Keep foreign objects out of the hopper.

Do not throw this Manual away. This Manual has important operating and maintenance instructions that you will need

at a later time. Always follow the instructions in this Manual.

Do not place clothing or other flammable items on or near your stove.

The viewing door must be closed and latched during operation.

Do not operate the stove if the flame becomes dark and sooty or if the burn pot overfills with pellets. Turn the stove

off, immediately inspect it, and call your dealer.

The stove is hot while in operation. Keep children, clothing, and furniture away. Contact may cause skin burns. Educate

all children of the danger of a high temperature stove. Young children should be supervised when they are in the same

room as the stove.

If the stove is installed in a room without air conditioning, or in an area where direct sunlight can shine on it, it is possible

this can cause the temperature of the stove to rise to operational levels. One of the sensors could then make the

convection fan and/or feed system start on its own. It is recommended that the stove be unplugged when not in use

for extended periods of time (i.e. during the summer months).

Contact your local building officials to obtain a permit and information on any installation restrictions or inspection

requirements in your area. Notify your insurance company of this stove as well.

This unit must be properly installed to prevent the possibility of a house fire. The instructions in this Manual must be

strictly adhered to. Do not use makeshift methods or compromise in the installation.

Allow the stove to cool before carrying out any maintenance or cleaning. Ashes must be disposed of in a metal container

with a tight lid and placed on a non-combustible surface well away from the home structure.

The stove must be connected to a standard 120V, 60 Hz grounded electrical outlet. Do not use an adapter plug or

sever the grounding plug. Do not route the electrical cord underneath, in front of, or over the stove.

The exhaust system should be checked a

minimum

of twice a year for any buildup of soot or creosote.

The exhaust system

must

be completely airtight and properly installed. The pellet vent joints must be sealed with RTV

500

F (260

C) silicone sealant, or with UL-181-AP foil tape. Fasten with at least 3 screws.

Your stove requires periodic maintenance and cleaning. Failure to maintain your stove may lead to smoke spillage into

your home.

This stove is designed and approved for pelletized wood fuel only. Any other type of fuel burned in this heater will void

the warranty and safety listing.

When installed in a mobile or manufactured home, the stove must be bolted to the floor and have outside combustion

air (per H.U.D. requirements). Check with local building officials.

THIS STOVE MUST NOT BE INSTALLED IN A BEDROOM OR SLEEPING ROOM.

BOSCA grants no warranty, implied or stated, for the installation or maintenance of your stove, and assumes no responsibility

for any consequential damages.

OWNER´S MANUAL

-4-

SAFETY PRECAUTIONS

Содержание SOUL 700

















































Результаты поиска

Содержание SOUL 700

Отзывы:

Bosca SOUL 700, Руководство пользователя, Страница: 5 / 48

Результаты поиска

Содержание SOUL 700

Отзывы: