Bort 93722425, Руководство пользователя

Страница: 7 / 20

7
device is ready for operation (fig .7b) .
Do not touch the power supply with wet
hands
!
Do not use the power cord, power socket
out of whack!
3. OPERATION
• If the indicator is green, then the steam is ready for use .
• Take the steam gun in your hand, press
on the steam button . Steam will start dispensing .
• To fix the steam button, press the steam lock button “8”
(fig . 2) .
• Choose the right accessories for your application .
See accessory instructions for details .
• If the device is not used for a long time, turn off the
power . The green light will turn on and off during
use time, it does not affect the process
work and steam .
FILLING WATER TO THE TANK DURING OPERA-
TION
Disconnect the appliance from the mains by removing
plug from the socket .
Attention: before removing the protective cap,
press the steam button to relieve any residual
pressure!
Turn the safety cap slowly, but do not remove
it, the residual steam will gradually escape un-
til everything will come out . Then place the appli-
ance in a cool place and let cool for three minutes .
Only then unscrew the cover completely .
Using a measuring cup, pour the required
amount of cold or hot water into the container .
Screw the safety cap tightly onto the steam cleaner body .
STORAGE, CARE & PRODUCT SUPPORT
PROPER STORAGE
Preparing your Steam Cleaner for storage is quick and sim-
ple . When you have finished your steaming tasks, follow
the steps listed below .
1 . Turn off the machine and unplug power cord from
electrical outlet;
2 . Allow unit to cool (at least 30 minutes for complete
cooling);
3 . Press and hold Steam Button to release all remaining
steam pressure;
4 . Remove all accessories from unit;
5 . Remove Boiler cap, drain any remaining water from
Boiler into a sink or tub-this will help to minimize miner-
al build-up and prevent over-filling during your next use .
Loosely replace Boiler cap;
6 . Store accessories safely away, near Steam Cleaner .
Store Steam Cleaner in a cool ,dry location .
MINERAL BUILD-UP
A common maintenance need for steam appliances is
the removal of build-up caused by high mineral content
in many municipal water supplies . This mineral build-up
may limit the effectiveness and reduce the life of your
Steam Cleaner .
The best way to minimize mineral build-up is to use dis-
tilled or de-mineralized water when using your Steam
Cleaner . If you are unable to use distilled water, it is rec-
ommended that the following procedure be followed
monthly to help remove any mineral build-up:
1 . Turn off the switch and unplug power cord from elec-
trical outlet;
2 . Allow unit to cool (at least 30 minutes for complete
cooling);
3 . Press and hold Steam Button to release all remaining
steam pressure;
4 . Remove all accessories from unit;
5 . Remove Boiler cap and drain water from Boiler into a
sink or tub;
6 . Fill Measuring Cup with 17 oz . (500 ml .) distilled vin-
egar;
7 . Carefully pour vinegar into Boiler . Slowly shake or
move unit around to agitate vinegar;
8 . Allow to stand for at least 40 minutes, or more if pos-
sible;
9 . Drain vinegar from Boiler;
10 . Rinse Boiler with fresh water, drain and repeat until
vinegar odor dissipate;
11 . Loosely replace Boiler cap and follow steps under
Proper Storage procedure of this manual .
TROUBLESHOOTING
• Often, failures have simple causes and you can do the
troubleshooting yourself using the following overview .
• If you are in doubt or if the failure is not listed here
please contact the authorized customer service .
• Repair works may only be performed by the authorized
customer service .
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resources
and protecting the environment by returning this
appliance to the collection centres (if available) .
Made in China .