Bort 93411751, Руководство пользователя

Страница: 6 / 24

6
from heat, oil, sharp edges and moving parts .
• Damaged or entangled cords increase the risk of electric
shock .
• When operating a power tool outdoors, use an extension
cord suitable for outdoor use .
• If operating a power tool in a damp location is unavoida-
ble, use a residual current device (RCD) protected supply .
• Stay alert, watch what you are doing and use common
sense when operating a power tool .
• Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication .
• A moment of inattention while operating power tools
may result in serious personal injury .
• Use personal protective equipment Always wear eye pro-
tection Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for ap-
propriate conditions will reduce personal injuries .
• Prevent unintentional starting Ensure the switch is in the
off-position before connecting to power source and/or
battery pack, picking up or carrying the tool .
• Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents .
• Remove any adjusting key or wrench before turning the
power tool on .
• A wrench or a key left attached to a rotating part of the
power tool may result in personal injury .
• Do not overreach Keep proper footing and balance at
all times This enables better control of the power tool in
unexpected situations .
• Dress properly Do not wear loose clothing or jewelry .
• Keep your hair, clothing and gloves away from moving
parts .
• Loose clothes, jewellery or long hair can be caught in
moving parts .
• If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure these are connected
and properly used .
• Use of dust collection can reduce dust-related hazards .
OPERATING MANUAL
1. Pour water from the water inlet
When the device is connected with the power ,you
shall pour the water from the the water inlet to the wa-
ter tank .The water level indicator light will go on with
the increasing water .You shall stop adding water when
there is all indicator light on .
Noted: The water level indicator keeps flashing and
sounds “beep,beep,beep”,then you shall stop adding
water .
Water quality requirements: domestic water,mineral
water, purified water .
2. Add water from water tank
You shall take away the top shell ,and add water directly
to the water tank .
Noted: Do not exceed the Maximum water level .
FUNCTION INSTRUCTION
When the device is connected with power,the buzzer
rings once with all indicator .
Lights once and then goes off ,it enter the standby
mode .
• Switch / Modes control
Touch the Switch / Modes control button to turn on the
device .lt will default by the low mode .
Touch the button again to set the mist mode from Low-
Medium-High-Auto . Every touch could change the mist
mode .
The device will stop working when you keep
touching the button for 2 second s .
(When setting the Auto mode, it will change the mist
volume according to the setting air humidity: 0 - 4 0%
working in High mode, 40 - 5 0 working in medium
mode, > 5 0 working in low mode)
Note: At shutdown, the device can not work when the
water is below the minimum water level . Please add wa-
ter and then turn on for using .
• Sleep mode
All the indicator light is defaulted by the standard light
when turn on the device . Touch the Sleep mode button
,the light is off .
Touch again,the light mode can be set from soft-stand-
ard with every touch . Touch it for one more time ,the
light is off
(The device will work in low mode when setting soft
light or turning off the light .)
MAINTENANCE AND INSTALLATION
Before cleaning unplug the device . Don’t use abrasives .
Store the device in a cool dry place . Make sure that the
device is unplugged when it is not used .
Always disconnect the mains plug and allow the air wash-
er to cool down before performing any maintenance
work .