Bort 91276056, Руководство пользователя

Страница: 8 / 32

8
• If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected sup-
ply . Use of an RCD reduces the risk of electric shock .
Personal safety
• Stay alert, watch what you are doing and use common
sense when operating a power tool . Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication . A moment of inattention while
operating power tools may result in serious personal
injury .
• Use personal protective equipment . Always wear eye
protection . Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries .
• Prevent unintentional starting . Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool . Carrying
power tools with your finger on the switch or energising
power tools that have the switch on invites accidents .
• Remove any adjusting key or wrench before turning the
power tool on . A wrench or a key left attached to a rotat-
ing part of the power tool may result in personal injury .
• Do not overreach . Keep proper footing and balance at
all times . This enables better control of the power tool in
unexpected situations .
• Dress properly . Do not wear loose clothing or jewellery .
Keep your hair, clothing and gloves away from mov-
ing parts . Loose clothes, jewellery or long hair can be
caught in moving parts .
• If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure these are connected
and properly used . Use of dust collection can reduce
dust-related hazards .
Power tool use and care
• Do not force the power tool . Use the correct power
tool for your application . The correct power tool will
do the job better and safer at the rate for which it was
designed .
• Do not use the power tool if the switch does not turn
it on and off . Any power tool that cannot be controlled
with the switch is dangerous and must be repaired .
• Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools . Such preventive safety measures reduce the risk of
starting the power tool accidentally .
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool . Power
tools are dangerous in the hands of untrained users .
• Maintain power tools . Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation .
If damaged, have the power tool repaired before use .
Many accidents are caused by poorly maintained power
tools .
• Keep cutting tools sharp and clean . Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control .
• Use the power tool, accessories and tool bits etc . in
accordance with these instructions, taking into account
the working conditions and the work to be performed .
Use of the power tool for operations different from
those intended could result in a hazardous situation .
Battery tool use and care
• Recharge only with the charger specified by the manu-
facturer . A charger that is suitable for one type of battery
pack may create a risk of fire when used with another
battery pack .
• Use power tools only with specifically designated bat-
tery packs . Use of any other battery packs may create a
risk of injury and fire .
• When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connec-
tion from one terminal to another . Shorting the battery
terminals together may cause burns or a fire .
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact . If contact accidentally occurs,
flush with water . If liquid contacts eyes, additionally seek
medical help . Liquid ejected from the battery may cause
irritation or burns .
Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts . This will ensure
that the safety of the power tool is maintained .
SAFETY WARNINGS FOR SCREWDRIVERS
• Use auxiliary handle(s), if supplied with the tool . Loss of
control can cause personal injury .
• Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord . Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock .
• Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance . Contact with electric lines can lead to
fire and electric shock . Damaging a gas line can lead
to explosion . Penetrating a water line causes property
damage or may cause an electric shock .
• Switch off the power tool immediately when the tool
insert jams . Be prepared for high reaction torque that
can cause kickback . The tool insert jams when:
– the power tool is subject to overload
– it becomes wedged in the workpiece .
• Hold the machine with a firm grip . High reaction torque
can briefly occur while driving in and loosening screws .
• When working with the machine, always hold it firmly
with both hands and provide for a secure stance . The
power tool is guided more secure with both hands .
• Secure the workpiece . A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand .
• Do not open the battery . Danger of short-circuiting .
• Protect the battery against heat, e . g ., against continu-
ous intense sunlight, fire, water, and moisture . Danger
of explosion .