Borri ASD91, Руководство по эксплуатации

Страница: 31 / 226

Installation and start-up of UPS B8000FXS 10-60kVA
Installazione e avviamento UPS B8000FXS 10-60kVA
OMD91050 REV. G 13
2.3.4 Installation
The product must be installed in strict compliance with the instructions contained in the
technical back-up documentation, including the present safety instructions. In particular, the
following points must be taken into account:

The product must be placed on a base suitable to carry its weight and to ensure its
vertical position;

The UPS must be installed in a room with restricted access, according to standard
CEI EN62040-1;

Never install the equipment near liquids or in an excessively damp environment;

Never let a liquid or foreign body penetrate inside the device;

Never block the ventilation grates;

Never expose the device to direct sunlight or place it near a source of heat.
Special environmental conditions
UPS B8000FXS is designed for normal climatic and environmental operating
conditions as defined in the technical specification: altitude, ambient operating
temperature, relative humidity and environmental transport and storage conditions. It
is necessary to implement specific protective measures in case of unusual
conditions:

harmful smoke, dust, abrasive dust;

humidity, vapour, salt air, bad weather or dripping;

explosive dust and gas mixture;

extreme temperature variations;

bad ventilation;

conductive or radiant heat from other sources;

strong electromagnetic fields;

radioactive levels higher than those of the natural environment;

fungus, insects, vermin.
Use authorized personnel only
All transport, installation and start-up operations must be carried out by qualified and
trained personnel.
The installation of UPS B8000FXS must be carried out by authorized personnel, in
compliance with national and local regulations.