14
·
Attach the Dust extraction system (12) onto the baseplate (11) all the way to the stop.
·
Dust extraction system can joninter dust bag or dust collector.
·
To join dust bag(13), clip dust bag spring and put it into the slot.
Cleaning and maintenance
Always pull out the mains power plug before startingany cleaning work.
·
Keep all safety devices, air vents and the motor housing free of dirt and dust as far
as possible. Wipe the equipment with a clean cloth or blow it with compressed air at
low pressure.
·
We recommend that you clean the device immediately each time you have finished
using it.
·
Clean the equipment regularly with a moist cloth and some soft soap. Do not use
cleaning agents or solvents; these could attack the plastic parts ofthe equipment.
Ensure that no water can seep into the device.
·
In case of excessive sparking, have the carbon brushes checked only by a qualified
electrician.Important! The carbon brushes should not be replaced by anyone but a
qualified electrician.
·
There are no parts inside the equipment which require additional maintenance.
If the connection cable of the power tool is damaged, it must be replaced by a specially
equipped for cable, that is available through the customer service organization.
Storage and transport
-Keep the machine in its original packaging if you not want to use for a longer period of
time.
-Store the machine out of reach of children in a dry and well ventilated place.
-Protect the unit against tipping, vibrations and shocks, in particular during transport in
vehicles.
Disposal and recycling
The unit is supplied in packaging to prevent its beingdamaged in transit.
This packaging is raw materialand can therefore be reused or can be
returned tothe raw material system.
The unit and its accessories are made of varioustypes of material, such as
metal and plastic.Defective components must be disposed of asspecial
