4
Additional safety instructions of the manufacturer
-Always wear a dust protection and use dust collecting equipment according to the
instructions. Health-damaging dust can occur during operation.
-Use blade designed with the speed not less than 12000 min
-1
. Disk cutter running with
overspeed can fly apart and cause injury.
-Use only well sharpened and not damaged cutting blade. The use of blunt or damaged
cutting tools can lead to serious personal injury and damage.
-Before each use check whether the protective guard and guard retracting system can work
properly.
-Make sure that the tool is switched off before you insert the mains plug into the socket.
-Check mains Plug and cable for damage before use. If a part is damaged, you can replace
it immediately by a qualified electrician.
-Ensure before use the biscuit joiner that the voltage specified on the tool matches the
mains voltage.
-Always fix the workpiece well and use the tool with both hands.
-Do not touch the cutting blade when the machine has been switched off. The cutting blade
will not stop immediately after switched off.
- Always use the guard. A guard protects the user from broken-off parts of the disc cutter
and inadvertent contact of the cutter.
-Manufacturer and distributor assume no warranty for damages if the biscuit joiner
changed without authorization or the necessary safety precautions were ignored.
-Do not expose the tool in rain or moisture.
- Be always attentive when using the product, so that you can early identify hazards. Rapid
intervention can prevent serious injury and property damage.
- Turn off the product when problems arise. Repair the product by a qualified expert, if
necessary, before you use the product.
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate all residual risk
factors. The following hazards may arise in connection with the power tool
’
s construction and
design:
Damage to lungs if an effective dust mask is not worn.
Damage to hearing if effective hearing protection is not worn.
Injuries and damage caused by broken tool which inserts or strik hidden objects.
Injuries and damage to property, caused by catapulted parts.
Damages to health resulting from vibration emission if the power tool is being used over longer period of
time or not adequately managed and properly maintained.
Warning! This tool produces an electromagnetic field during operation. This
field may interfere with active or passive medical implants under certain
circumstances. To reduce the risk of serious or fatal injury, we recommend persons with
medical implants to consult their doctor and the manufacturer of the medical implant
before the machine is operated.
