BorMann 038191, Быстрый старт

Страница: 7 / 13

EN
WWW.BORMANNTOOLS.COM
7
Storage and maintenance
1. When the use is over, please remove the water tank first, and pour out the remaining water in the water tank
2. Press and hold the steam release button on the handle to release the remaining steam in the body until there is no more steam in the nozzle and release it.
3. Turn off the power switch and unplug the power cord from the socket
4. Unplug the hose from the front of the body, and cover the cover of the socket on the body
5. Use an 8mm Allen wrench or a coin to unscrew the pressure relief valve from the body. If steam is still coming out of the pressure relief valve during its rota-
tion, please wait for a while until there is no steam coming out of the pressure relief valve. Unscrew the pressure relief valve completely
6. Hold the body with both hands, shake it gently, then tilt the body, and pour the remaining water in the body into other containers
7. If the poured water is too turbid, please pour an appropriate amount of water into the spout and repeat step 6
8. After there is no residual water in the standby body, tighten the pressure relief valve and install the water tank back into the body
9. If there are stains on the surface of the body after use, please wipe the surface of the body with a damp cloth
10. Used accessories (tubes, brush heads, nozzles, etc.) can be cleaned with water and detergent if they are dirty. In order to extend the service life and facilitate
the next use, please clean the accessories before storing
11. Store the main body and accessories in a dark and dry place after natural drying
Troubleshooting
When performing inspections, or if any abnormality occurs, please terminate the use, unplug the power plug from the power socket, and consult the sales store
or our company's after-sales service center. Please never repair it in the home, otherwise it may be dangerous.