BorMann 037897, Руководство пользователя

Страница: 5 / 15

EN
WWW.BORMANNTOOLS.COM
4
How to disconnect a gas bottle
a) Except for twin-cylinder installations with a changeover valve, turn off the gas tap if fitted to the appliance. Wait until the burner and pilot light have gone
out. For installations with a changeover valve, it is only necessary to switch off the empty cylinder.
b) Replace the orange safety cap onto the empty cylinder.
Warning and safety points
Please read the following points before using your gas grill:
a) Read the instructions before using the appliance. If instructions are not followed it may cause problems in use.
b) This gas grill accessible parts maybe very hot when being used. Keep young children away. Use protective when handling particularly hot components.
c) In the event of a gas leak, Turn off the gas supply at the gas bottle, extinguish any open flames, open lid and if leak continues, check for damages, poor
connections etc. Contact your local gas dealer immediately if the problem can’t be solved.
d) Do not move Gas grill during use.
e) Do not use or store any liquids, vapours or other materials in the vicinity when operating the gas grill.
f) This gas grill only to be used outdoors.
g) Do not use a naked flame to check for gas leaks.
h) Do not operate gas grill if there is a gas leak. Turn off the gas supply.
i) Do not attempt to disconnect any gas fitting part if your gas grill is being used, on the gas grill or the gas regulator / bottle.
j) Care is advised when operating your gas grill, you should never leave unattended when in use. Turn off the gas supply at the gas container after use.
k) The gas grill should be cleaned after use. Don’t obstruct the fire opening of the container compartment. If the fire opening is obstructed, please use
Φ1.6mm round stick to dredge.
Take care not to enlarge burner ports or orifice/nozzle openings when cleaning the burner or valves.
l) Do not attempt to use this appliance in a garage or any enclosed area. Also this appliance must be keep away from flammable materials during use, etc. We
recommend keeping a distance of at least 0.5 to 1.0 meter clear of any flammable materials.
m) We would recommend that this gas grill should be serviced by your local gas retail outlet at least once a year by a competent engineer. Do not attempt to
service this appliance yourself.
n) Any modification of the appliance may be dangerous. Do not attempt any unauthorized interference of the main controls on this gas grill, i.e. gas taps,
injectors, valves etc.
WARNING: The Handle Black Area (See Above Picture for Reference)
Will Become Hot When the Gas grill In Use, BE CAREFUL! Do Not Touch
The Black Area.
Safety precautions
a) Always test gas line for leaks at connector with soapy water after making connections.
b) The top lid must always be open when lighting the burner.
c) Use oven gloves and sturdy, long handled gas grill tools when cooking on the grill.
d) Be prepared if an accident or fire should occur. Know where the first aid kit and fire extinguishers are and know how to use them.
e) Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.
f) Always cook with great care.
g) Do not heat any unopened glass or metal container of food on the grill. Pressure may build up and cause the container to burst, possibly resulting in seri-
ous personal injury or damage to the grill.
Operating instructions
Caution: The lid must be open when lighting the burner!
Do not stand with your face directly over the gas grill when lighting it.
Your gas grill will have following method of ignition:
Pilot Gas Control Ignition (Main burner or main burner with side burner): With all gas controls on the Gas grill in the “OFF” position “OFF”, turn the gas cylin-
der valve to the on position at the regulator. To create a spark you must press the control knob (A) and hold in this position for 3-5 seconds to allow gas flow
and then turn anticlockwise to” HIGH” (B). It can spark to the burner lighting tube (C). You will hear a “snap” from the igniter and you will also see a orange
flame coming from the burner lighting tube at the left side of the burner (D).
Continue to hold the burner control knob in for two seconds after the “snap”, this will allow gas to flow completely down the burner tube (E) and insure
ignition.
When the burner is alight, adjacent burners will cross light when their controls are turned to “HIGH”
At “High” setting the burner flame should be approximately 12-20mm long with a minimum of orange flame. Turn the gas control fully anticlockwise for
minimum setting.
Should you have any difficulty lighting your gas grill following the above steps, contact your dealer for advice.
If the automatic ignition can’t be used, please remove the cooking grill and heat diffuser(hotplate ), and turn the valve anticlockwise to 90°C to light with
BBQ lighter in the distance of 5mm to the burner fire hole. Replace the cooking grill and heat diffuser (hotplate), please wear the fireproof and heat resisting
gloves.
Warning : If the burner still does not light ,turn the burner control knob to” OFF” and wait 5 minutes to let the gas clear before lighting again.