BorMann 037606, Инструкция по эксплуатации, Страница: 6 / 15

EN
WWW.BORMANNTOOLS.COM
6
6. Use push-sticks or push-block handle to avoid working with the hands close to the saw blade when using the bench-sawing mode.
7. The operator is adequately trained in the use, adjustment and operation of the machine.
8. Ensure that the arm is securely fixed when beveling.
9. Ensure that the arm is securely fixed in the working position in the bench sawing mode.
10. Stop the saw when unattended.
11. Ensure that the bench saw table is securely fixed at the chosen height.
12. Use correctly sharpened saw blades. Observe the maximum speed marked on the saw blade.
13. Ensure that any spacers and spindle rings used are suitable for the purpose as stated by the manufacturer.
14. When fitted with laser, no exchange with different type of laser is permitted.
15. Repairs shall only be carried out by laser manufacture or authorized agent.
16. Ensure that the upper portion of the saw blade is completely enclosed in the miter sawing mode;- Blade replacement procedure including the method for
repositioning and a warning that this must be carried out correctly.
17. Blade replacement procedure including the method for repositioning and a warning that this must be carried out correctly.
18. Ensure that the machine is always fixed to a bench, whenever possible.
19. Refrain from removing any cut-offs or other parts of the workpiece from the cutting area whilst the machine is running and the saw head is not in the rest
position.
How to support a long workpiece:
20. Use and correct adjustment of riving knife in the bench saw mode.
21. Rebating or grooving should not be carried our unless suitable guarding, such as a tunnel guard, is fitted as top guard.
22. Saw shall not be used for slotting ( stopped groove).
23. During transportation the upper part of the saw blade shall be covered, for example by the top guard or the saw blade is adjusted in the lowest position.
24. Use and correct adjustment of the lower saw guard I bench sawing mode.
25. When not in use, tools should be stored in a dry locked-up place, out of reach of children.
26. Inspect tool cords periodically and if damaged have them repaired by an authorized service facility.
27. Keep handles dry. Clean and free from oil and grease.
SYMBOLS ON THE MACHINE
INTENDED USE: Wood pieces, aluminium and aluminium alloys, plastic materials.
When using electric tools basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury.
Disregard of the following warnings can lead to severe personal injury
or material damage.
Read Instruction
Manual
Wear safety
goggles
Wear safety
hearing protection
Use approved
saw blade
Do not reach into the
running saw blade