BorMann 037255, Руководство пользователя

Страница: 4 / 11

EN
WWW.BORMANNTOOLS.COM
4
Readings below 0% (13.2 volts) will be regarded as LOW (icon will slowly flicker) and readings above 100% (14.6 volts) will regarded as HIGH (icon
will quickly flicker). If you get a LOW or HIGH reading, have the electrical system checked by Qualified technician. After 10 seconds, the charger will return to
the normal charging process.
12 / 24 REPAIR
It is an advanced battery recovery mode for repairing old, idle, stratified or sulphated batteries. NOT all batteries can be recovered. For optimal results, take the
battery through a full charge cycle, bringing the battery to full charge, before using this mode. One REPAIR cycle can take up to seven(7) hours to complete the
recovery process and will enter to charge (8 steps charging cycle) when completed. This mode uses a high charging voltage and may cause some water loss in
WET cell batteries. Plus, some batteries and electronics may be sensitive to high charging voltages. To minimize risks, disconnect the battery from the vehicle
before using this mode.
Battery level indicator
Charging steps
STEP 1: DIAGNOSIS (Check if battery has connected with the charger and also check battery voltage)
STEP 2: DESULPHATION (If battery voltage is too low, programs automatically generate pulsing current to remove sulphate)
STEP 3: ANALYSE (Check if the battery voltage reaches to the threshold after desulphation, and charging begins if the battery voltage is OK)
STEP 4: SOFT START (Charge with echelon constant current)
STEP 5: BULK (Charge with constant maximum current until battery voltage is reached to the threshold)
STEP 6: ABSORPTION (Provide gradually declining current charge for maximum battery voltage)
STEP 7: PULSE CHARGE (Pulse with trickle current)
STEP 8: A MAINTENANCE (Test if the battery can hold charge.
Continuously monitor the battery, and once the voltage is lower than threshold, the charger will enter trickle charge)
Battery level icon Explanation
The 25% bar will slowly flash when the battery level is less
than 25%. When 25% is reached, the bar will be solid.
The 50% bar will slowly flash when the battery level is less
than 50%. When 50% is reached, the bar will be solid.
The 75% bar will slowly flash when the battery level is less
than 75%. When 75% is reached, the bar will be solid.
The 100% bar will slowly flash when the battery level is less
than 100%. When 100% is reached, the bar will be solid.
Meanwhile the maintenance charging is activated.