BorMann 035930, Быстрый старт

Страница: 3 / 10

EN
WWW.BORMANNTOOLS.COM
3
Additional safety instructions for sanding operations
Set specific security guard for sanding
a) Do not use sandpaper too oversized for sanding discs. Follow manufacturers' recommendations when selecting sanding paper. More abrasive paper extend-
ing beyond the sanding pad presents a laceration hazard and may cause a crash, tearing of the disc or kickback.
Warnings
WARNING-To reduce the risk of injury, user must read instruction manual.
Always wear ear protection
Always wear goggles
Always wear a breathing mask
In accordance with essential applicable safety standards of European directives
Class II product
Safety rules for drywall sander
1. USE A RESPIRATOR approved by NIOSH for “Dust and Mist”. Ventilate work area and/or use a dust collector. Continued and prolonged exposure to high con-
centrations of airborne dust may affect the respiratory system function.
2. MAINTAIN FIRM FOOTING AND BALANCE. Use appropriate scaffolding. Do not overreach.
3. SANDING OF LEAD-BASED PAINT IS NOT RECOMMENDED. Lead-based paint should only be removed by a professional.
4. SANDING DRYWALL COULD LEAD TO A BUILD-UP OF STATIC ELECTRICITY IN THE TOOL. For your safety, the drywall sander is grounded.
Technical data
Voltage/Frequency: 110-240V~,50/60Hz
Input power: 400W
No load speed: 900-2100/min
Sanding pad: 210mm
Disc diameter 225mm
Adjustable Height 130-210mm
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses
or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
Description of main parts
Motor Control plate
Main tube Extension bar
Power
Led screen
Speed control
On/Off
Operating instructions
Foreword
The Drywall Sander is designed for sanding walls and ceilings that are made of drywall or plaster. The Sander provides a superior finish, and is faster than con-
ventional finishing methods for both new construction and renovation work. Clean-up time is minimized by the use of an external Vacuum Cleaner attached
to the Sander.