BorMann 035268, Руководство пользователя, Страница: 6 / 16

EN
WWW.BORMANNTOOLS.COM
6
Maintenance and inspection
Before do any maintenance and inspection, ensure unplug the plug.
For safe and proper working, always keep the power tool and the ventilation slots clean.
A damaged hammer rod protector should be changed immediately. We recommend having this carried out by an after-sales service.
1. Inspecting the tool
Since use of a dull tool will degrade efficiency and cause possible motor malfunction, sharpen or replace the tool as soon as abrasion is noted.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. failure to
do so could result in serious hazard.
3. Maintenance the motor
The motor unit winding is the very "heart" of the power tool. Exercise due care to ensure the winding does not become damaged and/or wet with oil or water.
4. Inspecting the carbon brushes
The Motor employs carbon brushes which are consumable parts. When they become worn to or near the “wear limit”, it could result in motor trouble. The
red service indicator LED lights up when the carbon brushes are worn out to indicate that the tool needs servicing. The power tool must then be sent to an
after-sales service agent.
When you have to replacement the carbon brushes by yourself, please following the order (any damage resulting from this procedure is not covered by the
warranty):
(1) Loosen the four set screws and remove the fan cover.
(2) Remove the helical spring and carbon brushes.
(3) After replacing the carbon brushes, install the helical spring and fan cover, with securely tightening four set screws.
5. Cleaning
Clean the machine regularly with a soft cloth, preferably after each use. Solvent such as gasoline, thinner, alcohol etc.. These kind of chemical materials are not
allowed to use, water or soap are recommended!
6. Protecting the Environment
Do not dispose of power tools together with household waste material!
The machine, accessories and packaging should be sorted for environmental friendly recycling.
CAUTION:
Repair, modification and inspection of Bormann Power tools must be must be carried out by a Bormann Authorized Service Center.
In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.