BorMann 034889, Быстрый старт, Страница: 5 / 15

EN
WWW.BORMANNTOOLS.COM
5
This machine is designed for cutting ferrous metals commensurate with the size of the machine. It is not designed for cutting other materials such as wood,
stone, bricks, etc. Use only cutting discs that are suitable for use with this machine. Do not use CV, HSS or HM cutting discs or any other types of cutting discs.
Everybody who operates or services this machine must be familiar with it and be informed of the possible dangers it poses. Do not make any modifications to
the machine.
Even if it is used correctly for the purpose for which it is designed, the construction and type of the machine means that it will always pose a certain level of
danger.
This includes the following risks:
-Hearing damage if personnel fail to use approved ear protection
-Danger of workpiece parts being catapulted out of the machine.
-Danger of recoil by the workpiece of workpiece parts.
-Harmful dust emissions from workpieces when the machine is used in enclosed areas.
-Danger of accident caused by hand contact in the uncovered cutting area of the machine.
-Crush injuries to fingers.
-Danger of cutting disc fracture.
-Danger by defective or broken cutting discs being catapulted out of the machine.
If it is not used for the purpose for which it is designed or if any modifications are made to the machine, the manufacturer cannot accept any liability. Also refer
to the safety instructions, the installation and operating manual and also to the general accident prevention regulations.
Specific Safety Instructions
Important. When using electric tools, certain basic safety precautions must be taken to rule out any danger of injuries to personnel, electric shock and fire. All
personnel who work on the tool must have read the safety instructions. Keep your workplace clean and well lit at all times to prevent accidents. Do not use the
tool in wet or damp environments. Do not expose it to rain. Ensure that there is adequate ventilation in the place of use.
Do not use electric machines in the vicinity of inflammable liquids or gases or in wet or damp environments. If you fail to follow this instruction, there is a risk
of fire or explosion. Do not leave the machine running without supervision.
Keep people away from your working area. Ensure that nobody, particularly children, do not touch either the cables or tools.
Do not use the machine if you are tired or lack concentration or your reactions are impaired due to the consumption of alcohol or medication. Inattentiveness
can cause serious injuries.
Do not distract anybody working on the machine.
You may cause them to lose control of the tool. Ensure that you have a safe place to stand. Do not adopt an abnormal posture to ensure that you can keep your
balance at all times.
Keep the tools clean and functional to enable you to work better and more safely with them. Refer to the instructions for servicing and for changing the tools
for more details. Wear suitable work clothing.
Do not wear loose-fitting clothing or jewellery. Ensure that you have a safe place to stand and that you wear non-slip shoes. Wear a hairnet if you have long
hair. Loose-fitting clothing, jewellery and long hair may become caught in moving parts. Always wear safety goggles.
Wear a breathing protection mask when working with materials that generate dust. Always wear ear protection as the levels of the produced noise are
considered high. Do not use the machine if its ON/OFF switch is defective. An electric tool that cannot be switched on or off is dangerous and must be repaired.
Do not touch earthed parts to protect yourself from electric shocks. Always switch on the machine before making contact with the material. Remove wrenches
and setting tools before you switch on the machine.
Wear safety gogles
WARNING ! READ THROUGH THE INSTRUCTIONS FOR USE BEFORE STARTING UP THE EQUIPMENT. Failure to follow
all instructions listed below, may result in electric shock, fire and /or serious personal injury. Persons, who are not
familiar with the instructions, may not operate the equipment. Keep the instructions for use in safe custody. Chil
-
dren and youths are not permitted to operate the equipment.
Wear ear protection Read the instructions
before using the tool
Always use breathing ap -
paratus when machining
materials which generate
dust.
Wear safety gloves
General Safety Instructions