BorMann 023166, Руководство пользователя

Страница: 6 / 9

3
www.BormannTools.com
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injuries.
b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the
switch or plugging in power tools that have the switch in invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on .A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves always from moving parts. Loose clothes,
jewelry or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly
used. Use of these devices can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off .Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may
affect the power tools operation .If damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier
to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these Instructions and in the manner intended for the
particular type of power tool tacking into account the working conditions and the work to be performed. Use of the power tool for
operations different from intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety
of the power tool is maintained.
Warning
！ The use of any accessory or attachment, other than recommended in this instruction manual, may present a risk of
personal injury. Have your tool repaired by a qualified person. This electrical tool is in accordance with the relevant safety
requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in
considerable danger to the user.
Application
Before plugging in, make sure that the network’s voltage and frequency correspond to those indicated on the tool’s ratings plate;
and that the ON/OFF button did not remain blocked. The tool operated, or is in “ON” position when the trigger is pressed and
comes back to the "stop” position when the same trigger is released. Always hold the tool firmly with both hands, with handles
and, while operating.
It is sometimes necessary to apply force on the point of the drill spindle so that the percussion system may operate otherwise the
protection device against off-load operating passes into action. Adopt a moderate workload; the use of too much force alters safety
and efficiency.
Changing tools
• Unplug the tool from the power supply, only use drill spindles compatible with the tool.
• Mounting: Clean the drill spindle before use and lightly oil the special imprint. Pull and turn the lock (C) 180
℃
clockwise.
Insert the drill spindle in the hexagonal housing, the slot on the lock side. Pull and turn lock (C) 180
℃
anticlockwise. Pull the drill
spindle to check that it can only have a translation movement translation of about 3cm.
•
Dismantling proceed in reverse order to mounting