BorMann 023166, Руководство пользователя

Страница: 5 / 9

2
www.BormannTools.com
GB
Important: Carefully read the instructions in this manual as well as the general safety instructions before using this tool.
Keep these manuals for further reference.
The tool should be connected to a power source connected to earth.
If your installation needs an extension, make sure it is equipped with an earth plug.
Wearing of protection goggles advised.
Wearing of protection against noise advised.
Wearing of protective shoes advised.
Wearing of respiratory protection advised.
This tool is designed to break, scale and drive concrete or similar materials. For example the installation of tubes, cables,
washroom factories of draining, and other civil engineering works.
Recommendations
1. Wear protection equipment (goggles, shoes, rotary filters, gloves, etc.). Avoid wearing jewelry, attach long hair and wear close-
fitting clothing.
2. Unplug your tool from the mains when you are not using it, when changing tools or for maintenance.
3. Work in a clean and uncluttered workspace. Your work area should be correctly lit.
4. Store the tool in a dry place, far from sources of heat or of dangerous or inflammable materials.
5. Work with tools in good condition and adapted to the task to undertake. This equipment should be used as such and should not
be overloaded. The tool should always be used with its additional handle and firmly held with both hands.
6. Before each use, check the oil level, the tightening of screws, the correct mouthing of the drive spindle.
7. Make sure of not driving into live parts or gas or water pipes, etc. You would risk electrocution or an explosion. Detect any live
or metallic parts before starting to work (for example, a live wire in a wall with a metals detector)
8. Do not try to open or dismantle the tool pour to intervene by yourself. Only a competent and specialized service ca intervenes
in complete safety, by using origin parts and the manufacturer’s drawing.
9. Use auxiliary handles supplied with the tool.
General Safety Rules
WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious
injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery
operated (cordless) power tools.
Save these instructions
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
2) Electric safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not Use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded
c) Do not expose power tools to rain or rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor user educes reduces the risk of electric shock.