BorMann 022329, Инструкция по эксплуатации, Страница: 4 / 10

EN
WWW.BORMANNTOOLS.COM
4
Safety Instructions
• Carefully read this instruction manual before start to use the product, install the gas pipe and/or connect the gas cylinder .
• The appliance is compliant with standard: EN 484: 1997.
• Well keep this instruction manual for future reference
• Only to be used outdoors . It is forbidden to use the equipment in houses.
• This appliance must be kept away from inflammable materials and heat source
• Never use the stove near heat sources, open flames and flammable materials .
• Place always the stove on perfectly horizontal surfaces and heat resistant . Never place the stove on surfaces in paper
support, wood, plastic or any other flammable materials .
• Always verify that the product is undamaged before starting to use it . In the case are present any kind of damage , never
use the appliance and get in contact only with the authorized service centre by the manufacturer.
• Do not modify or repair for any reason the equipment yourself or by unauthorized personnel . In case of malfunction or
apparent damage, always contact the service centres authorized by the manufacturer .
• Do not use the appliance with damaged seals and/or in case of leaking due to wear of the components. Replace damaged
hoses before using appliance.
• Do not use the stove for any others purposes than cooking food or heating up of liquids for food use.
• Never leave the appliance unattended during the use.
• Always keep the stove out of reach of children , out of dependent persons and pets .
• During the use , the stove could reach high temperatures . Pay always a lot of attention when your are using it and avoid to
touch the metal parts when hot .
• Never move the device during use. Use protective glove when handling particularly hot components.
• Do not move the appliance during use.
• If you feel gas’s smell coming from the appliance , immediately turn off the stove and close the gas cylinder valve. Contact
an authorized service centre to solve the problem.
• Use only and exclusively LPG gas cylinder and in accordance with legislation TPED
• Turn off the gas supply at the gas container after use.
• It shall be carried out away from any source of ignition when changing the gas container.
• The length of hose cannot exceed 1.5m. In Finland, the length of hose cannot exceed 1.2m.
• Make sure hose is not kinked. Make sure that when connected hose does not touch any warm surfaces.
• It’s necessary to change the flexible tube when the national conditions require it.
• Only regulator complies with EN 16129 can be used. Always use a low-pressure regulator to connect the gas cylinder to the
stove. This regulator for I3+(28-30/37) must to have exclusively a fixed calibration normalized at 37 mbar for Propane and 30
mbar for Butane. For I3B/P(30), the regulator should have a fixed calibration normalized at 30mbar.
• To store the product always in dry and slightly moist places , away from the atmospheric agents or factors that could
damage the stove itself.
• All repairs must be performed only by qualified personnel in the service centres authorized by the manufacturer or
importer.
• Avoid to block the venturis of burners. Check whether the venturis of burners are blocked before using the appliances.
• The diameters of cooking vessels which can be used are 120mm~200mm.
• Parts sealed by the manufacturer or his agent must not be altered by the users.
• Any modification of the appliance may be dangerous.
Instructions of Use
• Carefully read this instruction manual before start to use the product, install the gas pipe and/or connect the gas cylinder.
• Attention: during the use, this equipment generates emissions of carbon dioxide, which could became dangerous if
accumulated. For this reason, only use this product outdoor.
• It is forbidden to use the equipment in houses .
Installation
• Place the stove on a horizontal surface respecting the instructions indicated in the chapter of Safety Instruction. Please
refer to the parts list and assembly diagram as necessary.
• Check that the gas pipe that you want to use is in accordance with the rules in force in your country and it has already
assembled with the pressure reducer with the characteristics described in the chapter of Safety Instruction and in the
technical data table.
• Insert into the gas pipe a full mesh metal clamp suitable for LPG gas pipes .