BorMann 020882, Руководство пользователя

Страница: 11 / 18

10. Don't abuse cord. Never carry tool by cord or yank it to disconnect from
receptacle. Keep cord from heat, oil and sharp edges.
11. Secure work. Use clamps or a vise to hold work. It's safer than using your hand
and it frees both hands to operate tool.
12.
Don't overreach.
Keep proper footing and balance at all times.
13.
Maintain tools with care.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and if damaged, have repaired by authorized
service center. Inspect extension cords periodically and replace if damaged.
Keep handles dry, clean, and free from oil and grease.
14. Disconnect tools when not in use, before servicing, and when changing
accessories, such as blades, bits, and cutters.
15. Remove adjusting keys and wrenches. Form habit of checking to see that keys
and adjusting wrenches are removed from tool before turning it on.
16. Avoid unintentional starting. Don't carry plugged-in tool with finger on switch.
Be sure switch is off when plugging in.
17. Outdoor use extension cords. When tool is used outdoors, use only extension
cords intended for use outdoors and so marked.
18.
Stay alert.
Watch what you are doing using common sense. Do not operate tool
when you are tired.
19. Check damaged parts. Before further use of the tool, a guard or other part that
is damaged should be carefully checked to determine that it would operate
properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other conditions
that may affect its operation.
A guard or other part that is damaged should be properly repaired by an
authorized service center unless otherwise indicated elsewhere in this Operation
Instructions. Have defective switches replaced by authorized service center. Do
not use tool if switch does not turn it on and off.
20. Use the power tools only for applications specified in the Operation Instructions.
- 2 -