BorMann 010821, Руководство пользователя

Страница: 5 / 46

EN
WWW.BORMANNTOOLS.COM
5
For your safety:
Read and understand the entire manual before operating the machine!
Please keep this manual in a safe place for future reference!
Safety Warnings & Instructions - Symbols Affixed To The Machine
Understanding How Your Mixer Works
Read and understand the owners manual and labels affixed to the mixer. Learn its application and limitations as well as the
specific potential hazards peculiar to it.
Become familiar with the controls before operating this mixer.
Stay Alert
Do not operate the mixer while under the influence of drugs alcohol, or any medication that could affect your ability to use it
properly.
Do not use this mixer when you feel tired or distracted. Watch what you are doing at all times. Use common sense.
Avoid Dangerous Conditions
Make sure there is adequate surrounding workspace.
Keep your work area clean and well lighted. Cluttered areas invite injuries. Keep area around the mixer clear of obstructions,
grease, oil, trash and other debris which could cause persons to trip onto moving parts.
Only use or operate the mixer on solid, flat, level ground that is capable to support the weight of the mixer and its load capa-
ble to prevent the mixer from tipping over.
Do not attempt to move the mixer when it is loaded and/or in operation.
This mixer is intended for the production of concrete, mortar and plaster. It is not suitable for the mixing of flammable or ex-
plosive substances. Do not use the machine in areas where fumes from paint, solvents or flammable liquids pose a potential
hazard.
Inspection
Check your mixer before turning it on. Keep guards in place and in working order. Do not plug the mixer while the motor
cover has been removed. Check all bolts, nuts, and screws for tightness before each use, especially those securing guards and
drive mechanisms. Vibration during mixing may cause these to loosen.
Form a habit of checking to see that all the adjusting tools, shovels, hand trowels and other tools/equipments are removed
from mixer area before turning it on.
Replace damaged, missing or failed parts before using it. Warning labels carry important information. Replace any missing or
damaged warning labels.
Dress Properly
Do not wear loose clothing, gloves, neck-ties or jewellery (rings, wrist watches), they can be caught in moving parts.
Protective electrically non-conductive gloves and non-skid footwear are recommended when working.
Wear protective hair covering to contain long hair, preventing it from getting caught in machinery.
Wear a face or dust mask if the operation is dusty. Always wear safety goggles and/or face shields. Normal eyeglasses have
only impact resistant lenses they are not safety glasses.
Do Not Abuse Cord
Never carry mixer by cord or yank it to disconnect it from socket.
Keep cord in a safe distance from heat, oil and sharp edges.
Extension Cords
Extension cords must be no longer than 50 meters in length. The wire section must be 1.5mm2 on 230V to allow sufficient
current flow to the motor. Improper use of extension cords may cause inefficient operation of the mixer
which can result in overheating and motor damage. Only extension cords to H07RN-F specification intended for outdoor pur-
pose may be used. Avoid use of free and inadequately insulated connections. Connections must be made with protected
material suitable for outdoor use.
Make sure that any extension cord connections are dry and safe. Ensure that the extension cord is carefully laid out avoiding
liquids, sharp edges and places where vehicles might run over it. Avoid allowing the extension cord to be trapped underneath
the mixer. Unroll it fully or it will overheat and could catch fire.