Borg & Overstrom T1, Инструкция по установке и эксплуатации

Страница: 26 / 42

Leave the solution inside
machine for sanitisation
to take effect (minimum
5 minutes) while
thoroughly cleaning the
ProCore externally.
For this we recommend
the use of Sterizen
sanitising solution.
Pay particular attention
to the dispense faucet
and the push button
controls. For this use
Sterizen External
Sanitiser and Sanitising
Wipes.
Attend to any cosmetic
marks as needed.
Remember to include the
drip tray. If a Waste
Overflow System is
fitted, empty this and
flush through with a
small amount of
sanitisation fluid if
needed.
When the external
cleaning (minimum 5
minutes) is completed,
flush the machine using
the chilled button with
clean water until the
dispense water runs
clear. Repeat briefly with
the ambient and
sparkling buttons if
present.
Turn off water and
remove the service filter.
Retain service filter for
reuse.
Fit new filter. Turn on
incoming water supply
and reconnect the
power.