32
Error codes on the cooking zones display
Error code
Example
What to do
Erxx
or Ex (not E2
or EH)
or
display
not
operative
1. Switch off the cooker and disconnect
it from the mains.
2. Wait for about 1 minute, then
reconnect the cooker and turn on the
cooking zones.
3. Wait for about 1 minute and if the error
message does not appear again the
cooking zones can be used.
4. If the error message does not
disappear repeat step from 1 to 3.
5. If the problem continues do not use
the induction hob (only use the oven)
and contact your Authorised Service
Centre.
E2
or
EH
E and 2 alternating for one or more cooking
zones. This indicates an overheating of the
cooking zone/s.
1. Switch off the cooking zone/s and
leave to cool.
2.
If the problem continues do not use the
induction hob (only use the oven) and
contact your Authorised Service Centre.
E6
or
display
not
operative
The cooker has been incorrectly connected.
The appliance shall be connected to the
appropriate power supply by a qualified
technician.
Symbol
as per
side
figure
This indicates an incorrect operation of one
or more cooking zone control knob.
1. Turn the cooking zone control knobs
to the “
0
” (Off) position, then switch
off the cooker and disconnect it from
the mains.
2. Wait for about 1 minute, then reconnect
the cooker and turn on the cooking
zones.
3. Wait for about 1 minute and if the error
message does not appear again the
cooking zones can be used.
4. If the error message does not disappear
repeat step from 1 to 3.
5. If the problem continues do not use the
induction hob (only use the oven) and
contact your Authorised Service Centre.
EN
Bor
etti Milano / User guide - Installation advice
Содержание ML9015IFSAN
Страница 1: ...ML9015IFSIX ML9015IFSAN ML9015IFSZW ML9015IFSMAT EN USER GUIDE INSTALLATION ADVICE www boretti com...
Страница 18: ...18 Advice for the user EN Boretti Milano User guide Installation advice...
Страница 60: ...Abberdaan 114 1046 AA Amsterdam The Netherlands www boretti com Cod 1106096 GB 0...