Function buttons:
in addition to the selection of the
washing programme and half load option, the following
functions can also be set with the help of these buttons:
- the setting of the water softener,
- activation/deactivation of the rinse aid dispenser,
- deactivation/activation of the audible signals.
Programme selection buttons:
the selection of a
washing programme occurs by pressing one of these buttons
(see "Washing programmes" chart).
«Delay start» button:
this option allows the start of the
programme to be delayed from 1 to 19 hours.
The digital display indicates:
- the level of hardness to which the water softener is set,
- if the rinse aid dispenser is activated/deactivated,
- if the audible signals are activated/deactivated,
- the number corresponding to the selected washing
programme,
- the approximative remaining time of the running programme,
- the countdown of the delay start,
- fault codes concerning malfunction of the dishwasher.
"Half load" button
: this option is useful and economical
when only a few dishes need washing reducing the
consumption of water and energy. This option must be linked
to the selection of a washing programme.
Remember to load both baskets.
With only some programmes this option is available (See
"Washing programmes" chart).
Cancel button
: it allows to cancel:
- a washing programme in progress with eventual options set,
- a delay start in progress.
Indicator lights:
have the following meanings:
3 in 1 button
: This appliance is equipped with the 3 in 1
function, that allows the use of the "3 in 1" combi detergent
tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the 3 in 1 function before the set of a washing
programme.
Once selected this function (button indicator light illuminated) it
will remain active also for the following washing programmes,
to deactivate the function, press the button (button indicator
light off).
With the use of the 3 in 1 function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
NOTE:
Once the programme is running, the 3 in 1 function
can NO longer be changed. If you want to exclude the 3 in 1
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the 3 in 1
function.
In this case you have to set a washing programme (and
eventual options) again.
NOTE:
With the use of this function together with programme
Plate Warmer, the drying results may not be optimum.
The control panel
26
3 in 1 button
Function buttons
Indicator lights
Digital display
Programme selection buttons
On/Off button
Half load button
Delay start button
Cancel button
Half load available
- button activated
- indicator light on
Half load not available
- button deactivated
- indicator light off
Salt refilling indicator light, illuminates when the salt
has run out.
Rinse aid refilling indicator light, illuminates when
rinse aid has run out.
End of programme: illuminates when the washing
programme has ended.
