BORETTI BVW-682, Руководство пользователя, Страница: 117 / 140

DE
EN
47
Testing strip
The washing effectiveness of your machine de-
pends on the softness of the tap water. For
this reason, your machine is equipped with a
system that reduces the hardness in mains
water supply. The washing effectiveness will
increase when the system is correctly set. To
fi nd out the water hardness level of water in
your area, contact your local water board or
determine water hardness level by using the
test strip(if available).
Level 1 No lime
Level 2 Very low lime content
Level 3 Low lime content
Level 4 Medium lime content
Level 5 Lime content
Level 6 High lime content
Adjusting salt consumption
Table of Water Hardness Level Settings
Water German French Britisch Hardness Level Indicator
hardness hardness hardness hardness
level dH dF dE
1 0-5 0-9 0-6 L1 is seen on display
2 6-11 10-20 7-14 L2 is seen on display
3 12-17 21-30 15-21 L3 is seen on display
4 18-22 31-40 22-28 L4 is seen on display
5 23-31 41-55 29-39 L5 is seen on display
6 32-50 56-90 40-63 L6 is seen on display
If the hardness of the water you use is above 90 dF (French hardness) or if you are using well
water; you are recommended to use fi lter and water refi nement devices.
NOTE: Hardness level is adjusted to level 3 as a factory setting.
Adjust the water softener according to how hard your tap water is.
Open the
testing
strip.
Run
water
through
your tap
for 1
min.
Keep the
testing
strip in
water for
1
sec.
Shake the
testing strip
after taking it
out of water.
Wait for
1 min.
Make your machine’s water
hardness setting according to
the result obtained through the
testing strip.