BORETTI BPO-45, Руководство по эксплуатации

Страница: 60 / 164

60
EN
When finished with the settings, the display summarizes the recipe
set. The colon in the cooking time (00:30) will be flashing to indicate
that it can be changed.
To change it, use the - + buttons.
Or select the function directly and, in this way, the cooking
program starts with a countdown of the preset time on the display.
ATTENTION: certain recipes use pre-heating, so put the dish in when the oven has
reached the set temperature and the display shows “PRE-HEATING FINISHED PUT IN
THE DISH”
When cooking is finished the display will flash “PROGRAM FINISHED REMOVE THE
DISH” and, at the same time, the oven will beep until you press a key or open the door.
Note: at any moment, if you make a mistake choosing the values and/or you want to change the settings of your
recipe, you can select which cancels it and allows you start over from the beginning of the procedure.
NOTE: If you are cooking with the modified parameters of a pre-set recipe, while the oven beeps at the end of
cooking, you will see:
see how to save recipes in the next paragraph.
Personalising recipes
Once you have changed the cooking time of a preset recipe and executed it, you can save it for the
next by storing the new parameters you used (weight and cooking time).
At the end of the cooking cycle of the modified recipe, the icon below will appear and, to save it,
proceed as follows:
- with the + key select “YES”
- confirm with the time used is displayed,
- change it with + and - and confirm with , the weight used appears,
- change it with + and - and confirm with , you will see the message
“Recipe saved POS. 001”, and so on, in ascending order
Each time you access the “PERSONAL RECIPES” menu, you will find it saved in your recipes.