Boreal brisa BRS09HPL1IA, Руководство пользователя

Страница: 27 / 44

2 3
Malfunction analysis
General phenomenon analysis
Please check below items before asking for maintenance. If the malfunction still
Phenomenon Check items Solution
Indoor unit
can’t receive
remote
signal or
remote
controller
controller’s
has no
action.
●
● Whether remote controller is
Whether there are obstacles?
within the signal receiving
range?
●
● Whether remote controller is
Whether it's interfered severely
(such as static electricity, stable
voltage)?
pointing at the receiving
window?
● Is sensitivity of remote contro-
ller low; fuzzy display and no
display?
●
●
●
No display when operating
remote controller?
Fluorescent lamp in room?
● Signal receiving range is 8m.
Pull out the plug. Reinsert
the plug after about 3min, and
then turn on the unit again.
● Remove obstacles.
● Select proper angle and point
the remote controller at the re-
ceiving window on indoor unit.
Check the batteries. If the ●
●
power of batteries is too low,
please replace them.
● Check whether remote cont-
If yes, replace it.
roller appears to be damaged.
Take the remote controller
close to indoor unit.
and then try it again.
emitted
No air
from
indoor
unit
● Eliminate obstacles. ● Air inlet or air outlet of indoor
unit is blocked?
● Under heating mode, indoor
temperature is reached to set
temperature?
● After reaching to set temper-
●
ature, indoor unit will stop bl-
owing out air.
●
Heating mode is turned on just
now?
In order to prevent blowing
out cold air, indoor unit will be
started after delaying for sev-
eral minutes, which is a nor-
mal phenomenon.
fluorescent