bora PKT3UMIMEN-102, Инструкции по эксплуатации и монтажу

Страница: 6 / 32

EN
6
Safety
www.bora.com
The appliance must be suitable for the regional
voltage and frequency.
X
Check the information on the identification plate
and in the event of deviations, do not connect the
appliance.
X
Conduct all work extremely attentively and
conscientiously.
X
Do not connect the appliance to the mains until
the duct system has been installed or the
recirculation filter has been fitted.
X
Only use the connection cables supplied. Where
necessary these are included in the scope of
delivery.
X
Do not use the appliance until installation is
complete. This is the only way to ensure safe
operation.
ÿ
DANGER!
Risk of electric shock from damaged appliance
A damaged appliance can cause an electric shock.
X
Check the appliance for visible damage prior to
installation.
X
Do not install or connect any damaged
appliances.
X
Do not operate any damaged appliances.
CAUTION!
Risk of burning from control knobs that are
not positioned optimally.
If the control knobs are not installed in a suitable
place, during operation there is a risk of sustaining
burns from the cooktop surface.
X
Only install the control knobs in a suitable place,
which is practical and safe.
2.4.1 Safety instructions for cooktop
installation
ÿ
DANGER!
Risk of electric shock from incorrect mains
connection
Connecting the appliance to the mains incorrectly
poses a risk of electric shock.
X
Make sure that the appliance has a fixed
connection to the mains voltage.
X
Make sure that the appliance is connected to a
properly installed protective conductor system.
X
Make sure that technical equipment is provided
to enable all of the appliance’s poles to be
disconnected from the mains with a contact
opening width of at least 3 mm (LS switch and
automatic circuit breakers, fuses, contactor).
ÿ
DANGER!
Risk of electric shock from damaged power
supply cable
If the power supply cable is damaged (e.g. during
installation or by coming into contact with hot
cooking surfaces), this can cause an (lethal)
electric shock.
X
Make sure that the power supply cable does not
become trapped or damaged.
X
Make sure that the power supply cable does not
come into contact with hot cooking surfaces.
2.5 Safety instructions – operation
X
Make sure that the base of the cookware as well
as the appliance surfaces are clean and dry.
X
Always lift (do not drag) cookware to prevent
scratching and abrasion on the appliance surface.
X
Do not use the appliance as a storage surface.
X
Switch off the appliance after use.
WARNING!
Risk of burning from hot appliances
Certain appliances and their exposed parts become
hot during use. They should be left to cool down
completely after switching off. Touching hot
surfaces can cause serious burns.
X
Do not touch hot appliances.
X
Pay attention to the residual heat indicator.
ÿ
WARNING!
Risk of burns due to power cut
During or after a power cut a cooktop that was
previously in operation may still be hot.
X
Do not touch the appliance while it is still hot.
X
Keep children away from the hot appliance.
ÿ
DANGER!
Risk of fire from overheated oil or fat
Oil or fat in the pot can quickly heat up and ignite.
X
Never leave the appliance unattended when
cooking with oil or fat
X
Never extinguish oil and fat fires with water.
X
Switch off the appliance.
X
Extinguish the fire using a pan lid or a fire
blanket, for example.