bora PKT3UMIMEN-102, Инструкции по эксплуатации и монтажу

Страница: 12 / 32

EN
12
Appliance description
www.bora.com
PKT3:
Heat retention temperature
Switch off after hours:minutes
80–140°C 8:00
Tab. 4.5 Safety shut-down on the different heat retention levels
X
Switch the cooking zone back on if you want to put the
cooking zone back into operation (see „6.3 Operating the
cooktops“).
4.3.2 Residual heat indicator
i
While
H
is displayed (residual heat indicator), do not
touch the cooking zone or place any heat-sensitive
objects on top of it. Risk of burns and fire!
After switching it off, the cooking zone remains hot.
H
is displayed (Residual heat indicator).
As the cooktop cools, the indicator dims until it goes off at
<50°C.
4.3.3 Overheating protection
i
If the cooktop overheats, the power is reduced or the
cooktop is switched off completely.
The appliance is fitted with overheating protection. The
overheating protection can be triggered if:
O
cookware is heated up empty;
O
oil or fat is heated on high power;
O
a hot cooking zone is switched on again after a power cut.
Whilst the overheating protection is active, one of the following
steps is taken:
O
the activated power setting is switched back to the previous
level;
O
the power setting
ßp
can no longer be switched on;
O
the set power level is reduced;
O
the cooktop switches off completely.
After a sufficient cooling period, the cooktop can be used again.
4.3.4 Childproofing feature
i
If a single cooktop is operated without a cooktop
extractor, removal of the knob ring can prevent the
appliance from being switched on accidentally or without
permission.