bora PKFI3, Инструкции по эксплуатации и монтажу

Страница: 24 / 36

EN
24
Functions and operation
www.bora.com
This means, for example, that on the surface induction cooktop
very large pans or roasters can be used.
O
Both cooking zone indicators are activated in the display on
both control knobs.
i
If the bridging function is activated on cooktop PKFI3, the
power setting cannot be used. Use of the power setting is
possible on the Tepan stainless steel grill PKT3.
i
If both cooking zones are already in use when the
bridging function is activated, the lower of the two power
levels will be adopted for both cooking zones.
i
If a timer is running when the bridging function is
activated, this is adopted. If 2 timers are running, the
shorter one is used for the bridging function.
1
+
2
Fig. 6.8 Setting cooking zone power levels
X
Touch command on both control knobs at the same time.
O
An acoustic signal can be heard and the bridging function is
activated.
O
The power level and both cooking zone indicators are shown
on both control knobs.
X
Set the power level
0
.
or
X
touch command on both control knobs at the same time.
O
An acoustic signal can be heard and the bridging function is
deactivated.
O
The current power levels are retained.
O
Each cooking zone then goes back to being operated separately.
i
If no suitable cookware is recognised (pan size
recognition) on either of the two cooking zones on the
induction cooktop PKFI3 within 10 seconds, the bridging
function is deactivated.
6.3.5 Pan size recognition
On induction cooktops the cooking zone recognises the size of
the cookware automatically and only targets the energy at that
area. It also recognises cookware that is unsuitable or too small,
or if there is no cookware present.
The cooking zone does not work if...
O
... it is switched on without cookware or with unsuitable
cookware;
O
... the base diameter of the cookware is too small;
O
... the cookware is removed from a switched on cooking zone.
In these cases
v
,
is displayed.
If no pot is recognised within 10 minutes of setting a power
level, the cooking zone will switch off automatically.
6.4 Function menu
i
Every appliance offers different additional functions.
These can be selected and activated via a function menu.
Only the functions available for each type of appliance
are shown in the corresponding function menu.
Function menu on induction cooktops
A total of 3 additional functions are available on induction cooktops:
Menu item Description
1 v
Heat retention function (3 levels)
2 t
Timer function (automatic cut-off)
3 A
Automatic heat up function
Tab. 6.2 Function menu on induction cooktops
Calling up the function menu
Fig. 6.9 Accessing a cooktop function menu
X
Touch the cooktop control knob
O
The function menu is opened.
O
The first menu item is shown in the control knob display.
6.4.1 Variable heat retention function
The 3 heat retention levels enable cooked foods to be kept warm
at a constant temperature.
O
The maximum duration of the heat retention function is limited
to 8 hours.