EN
19
Installation
www.bora.com
INFO
The device connection should be at the rear.
Use the cable holders provided.
1
2
Fig. 5.14 Cooktop and height adjustment plates
[1]
Cooktop
[2]
Height adjustment plates
X
X
If applicable, insert the height adjustment plates [2].
2
1
Fig. 5.15 Mounting brackets
[1]
Screw
[2]
Mounting bracket
X
X
Fasten the cooktop [1] using the mounting brackets
[2].
X
X
Tighten the mounting bracket screws [1] with max.
10 Nm.
X
X
Verify that the alignment is correct.
X
X
Once all of the installation work is complete, seal the
devices with black, heat-resistant silicone sealant.
Installation rotated around 180°.
X
X
Rotate the cooktop around 180°.
X
X
For the installation, proceed as described above.
X
X
Change the installation direction in the configuration
menu (see Configuration menu).
≥70
90
90
90
90
90 196
196
196
196
370
370
370
110
1
1
1
1
110
Ø50 ±0,5
Fig. 5.12 Bore holes for 3 cooktops and 2 extractors
[1]
Bore holes for socket (2x external)
[2]
Bore holes for control knobs (8x)
[3]
Cooktop 3x
[4]
Cooktop extractor (2x)
[5]
Worktop
[6]
Floor unit panel
5.5.3 Installing the cooktop
3
2
1
Fig. 5.13 Insert cooktop
[1]
Connections for control knob and extraction system (front)
[2]
Cooktop
[3]
Worktop cut-out
X
X
Insert the cooktop [2] into the worktop cut-out [3].
X
X
Align the cooktop [2] exactly.
X
X
For a normal installation, please note that the
connections for the control knob and the extraction
system [1] are at the front.
