bora PCH2, Инструкции по эксплуатации и монтажу

Страница: 21 / 28

EN
21
Troubleshooting
www.bora.com
8 Troubleshooting
Observe all safety and warning information (see the Safety chapter).
Operating situation Cause Remedy
The cooktop cannot be switched on. The fuse or the automatic circuit breaker
of the electrical installation of the
apartment and/or house is defective.
Replace the fuse.
Switch the safety cut-out back on.
The fuse or the automatic circuit
breaker trips several times.
Call BORA After Sales Service.
The power supply is disconnected. Have a specialist electrician inspect
the power supply.
Odours and vapours arise when the
new cooktop is put into operation.
This is normal on brand-new
appliances.
Wait a few operating hours.
Contact After Sales Service
if the odour persists.
A cooking zone or the entire cooktop
switches off automatically.
The operating time of a cooking zone
has been exceeded.
Put the cooking zone back into
operation (see the Operation chapter).
The overheat protection has tripped. (see the Device Description chapter)
Tab. 8.1: Resolving a fault
X X
In all other instances, call BORA After Sales Service (see the Warranty, After Sales and Spare parts chapter).