bora Classic 2.0 Series, Руководство по эксплуатации

Страница: 48 / 60

EN
48
Cleaning and Maintenance
www.bora.com
Cleaning in the dishwasher
X
X
Place the components face down in the dishwasher.
X O
No water should be able to gather in the grease filter
components.
X
X
Wash on a programme with a maximum temperature of 65 °C.
X O
If it is no longer possible to clean the grease filter completely,
it must be replaced.
8.3.3 Fitting the components
Assembling the grease filter unit
i
It is not necessary to apply pressure when assembling
the components. The grease filter unit is designed so that
the individual parts can be assembled without force and
with no room for error.
X
X
Carefully insert the grease filter into the tray.
X
X
Ensure that the lock clicks into place.
X
X
Do not force the grease filter into the tray.
X O
If you notice any resistance whilst inserting the grease filter,
you just need to turn it around.
Fitting the grease filter unit
i
The grease filter unit can only be fully inserted without
resistance if it is facing the right way. If the instructions
are followed correctly, it is impossible to fit it incorrectly.
X
X
Carefully insert the grease filter unit into the cooktop
extractor.
X
X
Do not force the grease filter unit into the cooktop extractor.
X O
If you notice any resistance whilst inserting the grease filter
unit, you just need to turn it around.
Fitting the air inlet nozzle/
Fitting the air inlet nozzle All Black
X
X
Insert the air inlet nozzle.
X
X
Make sure it is positioned correctly.
8.3.4 Replacing the recirculated air filter
In recirculation mode, an additional activated carbon filter is
used. The activated carbon filter absorbs cooking odours. The
activated carbon filter is installed on the plinth fan or the duct
system.
i
Regularly replace the activated carbon filter. The service
life can be found in the operating instructions for the
relevant activated carbon filter.
i
You can obtain activated carbon filters from your
specialist supplier or by contacting BORA via the website
at http://www.bora.com.
X O
A description of how to replace the activated carbon filter can
be found in its operating instructions.
X
X
Reset the filter service indicator (see the Menu chapter,
point 6.3.11).
Removing the grease filter unit
Fig. 8.2 Removing the grease filter unit
X
X
Remove the grease filter unit.
X
X
To do this, use the handle inside the grease filter unit.
Disassembling the grease filter unit
Fig. 8.3 Removing the grease filter
X
X
Remove the grease filter from the tray.
X
X
To do this, push in the 2 locking tabs on each end of the filter.
8.3.2 Cleaning the components
The air inlet nozzle, grease filter and tray can be cleaned
manually or in a dishwasher.
X
X
Disassemble the grease filter unit prior to cleaning.
Manual cleaning
X
X
Use a cleaner and degreaser in one.
X
X
Rinse the components with hot water.
X
X
Clean the components with a soft brush.
X
X
Rinse the components well after cleaning.