17
Back
Check the skin tone of the area you’re treating
using the Skin Tone chart on page 2.
Backs can be treated, but the treatment will
require the help of another person to ensure
correct coverage and prevent any area receiving
overlapping treatments.
It is often useful to mark out the area to be
treated with gridlines using a very thin white
eyeliner pencil. It is best to work in “zones”
to avoid missing areas.
Care should be taken when treating bony areas
because the bone is close to the skin’s surface
making it more sensitive.
Arms
Check the skin tone of the area you’re treating
using the Skin Tone chart on page 2.
Arms, and particularly the lower arms, are often
tanned and may be sun-damaged. You
should
wait 30 days after the last exposure to the sun
before treatment.
If required, mark out the areas to be treated
using a very thin white eyeliner pencil.
You can treat around the elbow or wrist but
care should be taken when treating bony areas
because the bone is close to the skin’s surface
making it more sensitive.
During use
After 50 shots in quick succession there is an
automatic cooling delay of about a minute where
the system will not respond—this is absolutely
normal and nothing to worry about. This cooling
delay is indicated by the ‘READY’ light flashing.
When it glows constantly the unit is ready to
use again.
After 200 shots within a 30 minute period
there will be a 5 minute automatic cooling
delay where the unit will not respond—this is
absolutely normal and nothing to worry about.
This cooling delay is indicated by the ‘READY’
light flashing. When it glows constantly the
unit is ready to use again.
If the handset starts to feel uncomfortably
warm or hot against your skin during use, place
the handset back on the cradle and switch the
Smooth Skin system to Standby mode. Without
turning the Smooth Skin system off, leave the
handset to cool down before continuing with
the treatment.
Your Boots Smooth Skin system features a
SLEEP
mode
which
operates
after
approximately 1 hour in standby mode. When
this happens the STANDBY light on the unit will
flash approximately once per second. To return
the unit back into STANDBY mode, press and
hold any button until the STANDBY light
illuminates continuously, alternatively turn the
product off for a few seconds and then back on.
The Boots Smooth Skin system is now back in
STANDBY mode, to continue using the Boots
Smooth
Skin
system
press
the
STANDBY/READY mode button again.
The unit will automatically go into STANDBY if
not used for approximately 1 minute, and the
green STANDBY light will come on. To use again
press the STANDBY button.
Boots Smooth Skin User Guide.pdf 19/1/10 12:24:09
