3
Model Variants covered by this manual:
Model
Description
BRW181E
No product coils, 3 stage pump, digital thermostat.
BRW181D
No product coils, 3 stage pump, digital DFX thermostat
BRW181D3
No product coils, 4 stage pump, digital DFX thermostat
BRW182T
2 product coils, 3 stage pump, mechanical thermostat, SCOPE chiller
BRW183
2 product coils, 4 stage pump, mechanical thermostat
BRW183E
2 product coils, 4 stage pump, digital thermostat
BRW183T
2 product coils, 4 stage pump, mechanical thermostat, SCOPE chiller
BRW184
4 product coils, 2 stage pump, mechanical thermostat
BRW184E
4 product coils, 2 stage pump, digital thermostat
BRW185
4 product coils, 3 stage pump, mechanical thermostat
BRW185E
4 product coils, 3 stage pump, digital thermostat
BRW186
6 product coils, 2 stage pump, mechanical thermostat
BRW186E
6 product coils, 2 stage pump, digital thermostat
BRW187
6 product coils, 3 stage pump, mechanical thermostat
BRW187E
6 product coils, 3 stage pump, digital thermostat
Installation and Commissioning
The unit must be installed by a competent person, on a firm level surface capable of
supporting the weight of the machine when the bath is filled, and all connections
made.
It is important that the ventilation openings in the machine are not blocked to allow
the free movement of air for both the integral and split versions. Inadequate
ventilation will shorten the life of the fridge system. 100 mm clearance around the unit
is the minimum required to ensure correct operation.
Locate a container beneath the bath overflow to prevent any water spillage as ice is
formed in the bath, and fill the bath with cold water until it comes out of the overflow.
Model Numbering, Installation and Commissioning
