BMTV-9750DVUSBT
- 8 -
Brake Control
Connect the brake control wire AUTO_ANT (see Wiring Diagram). It is necessary to
connect the Brake Control wire to the Hand-brake switch of the car. While driving, the
TFT monitor will display the alarm picture (see as follows) in order to ensure the
safety.
Under the Rear View Mode, the Brake Control function is no effective.
Auto Antenna Control
Connect the auto antenna control wire AUTO_ANT (see Wiring Diagram). The
antenna will lift when the unit startup; it will descend when the unit turnoff
FUSE: When replacing the fuse, make sure that the new fuse is the correct type and
amperage. Using an incorrect fuse could damage the unit. This unit uses ( 2 amp )
Fuse for Ignition switch ( RED ACC+) & 15 amp Fuse for Memory Back up ( Yellow
Batt )
Содержание BMTV-9750DVUSBT
Страница 10: ...BMTV 9750DVUSBT 9 Wiring Diagram ...