Booma-RC BLACKMAX, Руководство пользователя

Страница: 5 / 20

Warnings and safety notes
Never leave
BLACKMAX
unsupervised during the Charge/Discharge process. If any
abnormal charging characteristic is observed, immediately terminate the process and
refer to the operation manual.
To maximise the life of your
BLACKMAX charger
keep it away from dust, damp, rain,
heat direct sunshine and vibration. Be careful not to drop your
BLACKMAX charger
.
The
BLACKMAX
circuitry will operate when powered from a 10-18V DC only. AC power
is possible with the optional
Booma-RC
BLACKMAX
AC power adaptor.
This unit and the battery to charge or discharge should be set up on a heat-resistant,
non-inflammable and non-conductive surface. Never place them on a car seat, carpet or
similar. Keep all the inflammable volatile materials well away from operating area.
It is your responsibility to understand the chemistry of the battery to be charged or
discharged. If incorrect battery chemistry is selected the battery can be damaged or
destroyed and fire may result. Please read and thoroughly understand the following
battery information.
NiCd/NiMH
Voltage level:1.2V/cell
Allowable fast charge current:1C-2C depends on the performance of cell
Discharge voltage cut off level 0.85V/cell(NiCd), 1.0V/cell(NiMH)
Lilo
Voltage level:3.6V/cell.
Max.charge voltage:4.1V/cell.
Allowable fast charge current: 1C or less.
Min.discharge voltage cut off level:2.5V/cell or higher.
LiPo
Voltage level:3.7V/cell.
Max.charge voltage:4.2V/cell.
Allowable fast charge current: 1C or less.
Discharge voltage cut off level:3.0V/cell or higher.
Life (A123)
Voltage level:3.3V/cell
Max.charge voltage:3.6V/cell
Allowable fast charge current: 4C or less(e.g. A123M1)
Discharge voltage cut off level:2.0V/cell or higher
Pb
Voltage level:2.0V/cell
(Lead-acid) max.charge voltage:2.46V/cell
Allowable fast charge current:0.4C or less
Discharge voltage cut off level:1.50V/cell or higher
To avoid short-circuits when connecting batteries to
BLACKMAX
, always connect the
charge cable to the unit first and only then to the battery.