Booma-RC BLACKMAX, Руководство пользователя

Страница: 11 / 20

Once the charge process starts you will be shown
the number of cells you set up and the processor
will auto detect the number of cells and ask you
to confirm it’s findings. ‘R:’ shows the number of
cells found by the charger and ‘S:’is the number of
cells selected by you at the previous screen. If both
numbers are identical you can start charging by
pressing Start/Enter button. If not, press Batt Type/
Stop button to go back to previous screen. Then
carefully check the number of cells of the battery
pack before attempting to charge again.
To stop charging press Batt Type/Stop key once.
Charging Lithium batteries in balance mode
This mode is used for balancing the voltage of individual Lithium battery cells and
for charging
Booma-RC MAXPACK
batteries. If charging a single battery pack,
connect the balance charge jack to the appropriate balance port on the right side of the
BLACKMAX
charger. You then connect the main power output lead to the output plug
to the output of charger. When you charge in this mode charger will monitor the voltage
of each cell of the battery pack and adjust charging current that is feeding to each cell.
This is balance charging and this mode will give you maximum life of your
MAXPACK
battery. YOU CAN BALANCE CHARGE 2 x MAXPACK battery packs with the
Booma-RC 2 x MAXPACK adaptor. Please see instruction supplied with the
MAXPACK adaptor for details.
The value on the left side of second line sets the
charge current and the value on the right side of
second line sets the voltage of the battery pack.
After setting the current and voltage press the
Start/ Enter key for more than 3 seconds to
start the process. (Charge current:0.1~5.0A,
Voltage:1~6 series)
Once the charge process starts you will be shown
the number of cells you set up and the processor
will auto detect the number of cells and ask you
to confirm it’s findings. ‘R:’ shows the number of
cells found by the charger and ‘S:’is the number of
cells selected by you at the previous screen. If both
numbers are identical you can start charging by
pressing Start/Enter button. If not, press the Batt
Type/Stop button to go back to previous screen.
Then carefully check the number of cells of the
battery pack to charge again.