BKS-ST-180C_Product Manual
BooCax
12
/
28
boocax.com
6.
Preparation before use
6.1.
Install the charging pile
The charging pile of the spray robot should be placed in a safe and tidy place. It should be on
the horizontal ground with its back against the flat wall (it is better to fix the charging pile to the
ground or wall). As shown in the following figure:
Schematic Diagram of Installation and Use of Charging Pile
①
Place the back of the charging pile against the wall, and then turn the foot pads at the
bottom to adjust the charging pile.
②
Connect the power cord, adapter, and charging pile as shown above, and finally connect the
end of the power cord to the 110V / 220V AC socket to formally complete the boot preparation.